Showing posts with label clarence moreton basin. Show all posts
Showing posts with label clarence moreton basin. Show all posts

Saturday, 7 May 2016

Geology of the 'Big Scrub Rainforest' (Part 2)


The story of the 'Big Scrub' s preserved in the rock unit known as the Neranleigh-Fernvale Beds. The first post in this series is about this rock, the foundations of the region. This post deals with the period of big sedimentary basins which corresponds with the age of the dinosaurs. Some 50 or 60 million years elapse from the Neranleigh-Fernvale Beds until we come to our next period of rock formation.

The Big Basins

Walloon Coal Measures overlain by Orara Formation at Bexhill
This period begins in the age of the dinosaurs during the end of the Triassic Period. During this time tectonic forces became extensional, that is, the east coast of Australia was pulled and twisted apart, very little compression occurred. The crust became thinner as the once colliding continental plates began to relax and lowland basin-shaped regions formed. The thin crust allowed more volcanism to occur and the first geological units of the Ipswich and Clarence-Moreton Basin were formed. The Chillingham Volcanics consisting of lavas and volcanic ash was laid down in after 229Ma and this was subsequently overlain by units of lake and river deposits including the Evans Head Coal Measures, Laytons Range Conglomerate, Walloon Coal Measures and many other layers. By the height of the age of the dinosaurs, during the Jurassic great river valleys spread out from the mountains of the New England over our region. These rivers laid down great expanses of alluvial sand which were further overlain by other units. The great expanses of river sand are called the Orara Formation.

Today, like the Neranleigh-Fernvale Beds the sediments of the Clarence-Moreton Basin in the ‘Bigscrub’ area are mostly obscured by younger rocks. However, some of the Chillingham Volcanics seem to present in the Blackhall Range behind Wardell though this is difficult to identify. Rocks of the Orara Formation are present at the edge of Meerschumvale but are most obvious at Bexhill, indeed at Bexhill the Walloon Coal Measures are evident in the old brickpit. The Walloon Coal Measures are overlain by a sub-unit of the Orara Formation called the Kangaroo Creek Sandstone. This Sandstone forms nutrient very well-draining but poor soils. Lovely examples of the Kangaroo Creek Sandstone can be seen at Bexhill Open Air Cathedral or in the creeks near The Channon. This means that the vegetation on these areas consists of different plants to that of the rest of the ‘Bigscrub’. The soils in these areas cannot support the lowland subtropical rainforest that is the biggest component of the ‘Bigscrub’ unless they are well sheltered in a gorge.

Even though the units of the Ipswich and Clarence-Moreton Basins are dated from the age of the dinosaurs (the Triassic, Jurassic and Cretaceous Periods) no one has yet found fossils of dinosaurs preserved in any of these units in our ‘Bigscrub’ area. However, abundant fossils of plants and fish do exist in many units of the Clarence-Moreton Basin and dinosaur footprints have been seen in rocks of the Walloon Coal Measures in the Queensland part of the basin. Some fossil fish have been observed in the creeks near Nimbin. Along with the abundant coal during the Jurassic shows there was a very large quantity of organic matter and plants growing at the time. This was a time rich in life.

Friday, 4 September 2015

Baseline CSG methane in groundwater

A friend recently let me know that a paper that one of his students wrote for the Journal of Hydrology had been published. I had a very minor involvement in the formative stages of the paper which came about indirectly as a result of the protests of many local people about potential coal seam gas (CSG) and other natural gas types in the region. The paper (Atkins et al 2015) is essentially the results of a data collection exercise but has some interesting techniques and findings about the baseline concentrations of gas in groundwater bores in the Richmond Valley area.

Methane concentration for different geological environments
(after Atkins et al 2015)
91 water samples were collected from government and private bores in geological units overlying the target CSG geological formations in the Clarence-Moreton Basin (e.g. the Walloon Coal Measures). These units were quite diverse and ranged from sedimentary rocks of the Piora Member of Grafton Formation and the Kangaroo Creek Sandstone (recently reclassified as the Orara Formation), basalt lava flows of the Lismore, Astonville and Kyogle Basalts and Quaternary aged alluvium including coastal sands and riverine sedimentary environments.
Special glass water sample containers were used to collect the samples. These were then injected with a carbon dioxide and methane free gas to create a clean “air bubble”. The methane and carbon dioxide naturally dissolved in the water will then come into equilibrium with the “air bubble”. The resulting gas from the bubble can then be extracted and the concentration and isotopic composition of the carbon in the two compounds determined by an electronic analyser. The isotopic signature can then be assigned to recent biological formation (biogenic) or geologically derived (thermogenic) origin.
The end result was annoyingly quite not straight forward. The concentration of methane showed no obvious relationship to the chemistry of the groundwater. However there was a relationship between geological units. Methane concentration was very low in the basalt aquifers and relatively higher than the Clarence-Moreton basin sedimentary rocks and much higher in the Quaternary alluvium of the Richmond River valley floodplain and coastal sands systems. So there was more methane in some of the aquifers that were the less likely to be connected to any CSG formations! Quite counter-intuitive.
The isotopic signatures did not really help clear up this confusion very much. There appeared to be a large thermogenic component to the coastal sands and flood plain aquifer systems sometimes at concentrations greater than the formations that should be the thermogenic CSG source. Why? It was noted by some CSIRO scientists working in the Great Artesian Basin that sometimes biogenic gas can be oxidised and then be chemically reduced back to methane and this process favours the thermogenic isotopes (Day et al. 2015). So, It gives the impression of thermogenic gas.
This means that the methane gas concentration is related to the biological activity in and around the aquifer. The shallowest groundwater systems are the most connected with surface water and biological processes and therefore these have the highest concentrations of methane. The Clarence-Moreton Basin sediments are not connected with the CSG and natural gas rich formations.
This means that if companies like Metgasco do commence gas operations in the area there is a statistical background that can be used to compare if anyone becomes concerned about methane in their water bores. Interestingly, it also shows that methane in groundwater is probably not a good method to search for natural gas in the region. It might apply to other areas like the Great Artesian basin but apparently there are good barriers between CSG and non-aquifers in the Northern Rivers. This is good news since if something does go wrong it is now more easy to identify if it has impacted upon any groundwater.

References/bibliography:

Atkins, M.L., Santos, I.R. & Maher, D.T. 2015. Groundwater methane in a potential goal seam gas extraction region. Journal of Hydrology: Regional Studies. V4.
Day, S., Ong, C., et al. 2015. Characterisation of regional fluxes of methane in the Surat Basin, Queensland. CSIRO report EP15369

Monday, 2 March 2015

Do you trust a geological map? (Part 2)

In an earlier post I showed an example of how making the assumption that published geology maps are correct has some big problems. In that example it was the digging of test pits where coal was uncovered which clearly showed the mapping was wrong. Since that post I found another example and this one only needed a look out the car window to know that something was wrong!

My interpretation of the geology of the area in question
Note that the area is approximately 7km across
I had a 4WD day a few weeks ago in the Bungabee State Forest between Lismore and Kyogle. The state forest is located on the southern section of the Mackellar Rangers. It is a nice area but as usual for the Richmond River catchment is invaded by noxious and environmental weeds (In fact the worst variety of weeds I saw that day was at the National Parks managed Muckleewee Mountain Nature Reserve). But I digress... It was during this 4WD trip that I looked out of the window! Where there were cliffs or rocks exposed in streams I glanced out and saw that they were clearly Clarence-Moreton Basin sedimentary rock. I didn't think this was particularly unusual at the time but when a quick opportunity arose I had a closer look.

Present mapping (Brunker et al 1978)
Area is the same as my map above
At the base of the range (near Muckleewee Mountain Nature Reserve) I broke off a fresh bit of rock from a cliff face. The ‘fresh’ sedimentary rock was a rusty brown colour. It was composed of grains that were made from other rock fragments, from feldspar and from quartz. I'd call it a litharenite according to the classification of Pettijon et al (1987), however I might have underestimated the amount of clay particles in it. The appearance of the litharenite was quite dull. I consulted a geological map that night and noticed that the area was not even mapped as sedimentary rock. It was mapped as Lismore Basalt, old lava flows. There were however some areas on the map, a few kilometres away that did have some sedimentary rock (mapped as Kangaroo Creek Sandstone). However, the Kangaroo Creek Sandstone has a distinct saccaroidal texture, a sparkly sugar grained appearance. It was clearly quite different to the rock I was looking at. The only thing that looked consistent to me was larger scale features in the cliff faces showing cross-bedding. However, cross-bedding is a very common feature in most of the Clarence Moreton Basin.

So, with my field observations mind and while reviewing a new stratigraphic guide for the youngest members of the Clarenece-Moreton Basin, the rock I was looking at appeared to be consistent with the expected rock in the Bungawalbin Member of the Orara Formation as defined by Doig & Stanmore (2012). See this previous post for more details. When I found some spare time I did a quick remapping of the area based… As you can see from the pictures my mapping is quite different. This again just goes to show that a geological map might not give you an answer. It is best to look in the field and deeply consider what you find.

References/bibliography:
*Brunker R.L., Cameron R.G., Tweedale G. and Reiser R., 1972, Tweed Heads 1:250 000 Geological Sheet SH/56-03, 1st edition, Geological Survey of New South Wales, Sydney
*Doig, A., & Stanmore, P. 2012. The Clarence-Moreton Basin in New South Wales; geology, stratigraphy and coal seam gas characteristics. Eastern Australian Basins Symposium IV. Brisbane.
*Pettijohn, F.J., Potter, P.E., & Siever, R. 1987. Sand and Sandstone. Springer-Verlag, Berlin

Wednesday, 3 September 2014

Clarence-Moreton Basin Geology Video

The NSW Office of Water have posted an excellent video summary of the geology of the Clarence-Moreton Basin. It provides an excellent overview.






Sunday, 6 July 2014

The Orara Formation and the reviewed Kangaroo Creek Sandstone

There has been an increase in our understanding of the Clarence-Moreton Basin in recent years. The central upper portions of the basin have had several cored and un-cored boreholes drilled during exploration for natural gas, especially Coal Seam Gas. In this post, I will cover the implications of this exploration on our understanding of the Kangaroo Creek Sandstone and the recognition of another previously unknown unit.

In a previous post I described the Kangaroo Creek Sandstone. This unit was identified as a formation directly overlying the Walloon Coal Measures (and the MacLean Sandstone Member of the Walloon Coal Measures) (McElroy 1963). However, a recent paper (Doig & Stanmore 2012) attempts to resolve newly identified characteristics which have resulted in the authors proposing the creation of a new formation called the Orara Formation. It is proposed by Doig & Stanmore (2012) that the Orara Formation is comprised of two member units. These are another new unit called the Bungawalbin Member and the now demoted Kangaroo Creek Sandstone Member.

Doig & Stanmore (2012) found that the proposed Bungawalbin Member differed substantially from the Kangaroo Creek Sandstone and overlying Grafton Formation. They describe the Bungawalbin as between 45m-115m thick and dominated by mudstone and carbonaceous mudstone that is thinly bedded with fine grained sandstone with increasing amounts of massive, medium-grained quartzose sandstone beds near the base of the member. The unit is interpreted as a persistent low energy riverine floodplain environment.

The Bungawalbin Members contact with the underlying Kangaroo Creek Sandstone Member is transitional. With the medium-grained quartz rich sandstone becoming dominant in the Kangaroo Creek Sandstone. The composition and formation history of the Kangaroo Creek Sandstone has not been questioned but the significant fine grained component of the Bungawalbin Member necessitates the distinction between these two members. Additionally, Doig & Stanmore (2012) clearly demonstrated that the geophysical response of the Bungawalbin Member was substantially different from the Kangaroo Creek Sandstone.

Hence, we are learning more about the land on which we live. The geology is slowly becoming better understood. It is interesting to observe that there has been no detailed work on the upper most formations of the Clarence-Moreton since the 1960’s. The drilling that has occurred has unlocked more hidden characteristics of the basin. It helps our understanding of basin history as well as the original intention of finding gas resources. There is more to cover in future posts including understanding of the basins youngest formation, the Grafton Formation, but that will come soon.

References/bibliography:

*Doig, A. & Stanmore, P. 2012. The Clarence-Moreton Basin in New South Wales: geology, stratigraphy and coal seam gas characteristics. Paper presented at the Eastern Australasian Basin Symposium IV. Brisbane.
*McElroy, C.T., 1963. The Geology of the Clarence-Moreton Basin. Memoirs of the Geological Survey of New South Wales, Geology. 9.

Monday, 19 May 2014

Geology, stratigraphy, water and CSG a bit more understood

A CSIRO researcher recently provided me with a copy of a conference paper on the Clarence-Moreton Basin that I have been searching for (Doig & Stanmore 2012). I was looking for this information for quite some time as I thought there was much to be learned from it. This is because the research was based upon coal seam gas (CSG) exploration results. It did not disappoint me at all. I have previously blogged on the stratigraphy of the basin but frequent visitors will be aware that there has been a hiatus on this topic. This is because I knew more information had been compiled as a result of gas exploration in the region. In particular this was to do with the Grafton Formation and Kangaroo Creek Sandstone. You can read my previous posts but note that Doig & Stanmore (2012) propose to reclassify these units (see figures 1 and 2 on this post). The information my previous posts were based upon Wells and O’Brien (1994). This is still the most comprehensive guide to the basin but now there is potentially some significant refinements.

Interpretation of the stratigraphy of the upper sequences of the Clarence-Moreton Basin
after Wells & O'Brien (1994) and Willis (1994)
Doig & Stanmore (2012) noted that CSG exploration drilling has provided important clues to the layers that make up the Clarence-Moreton basin that were inferred only through limited field exposure. Drilling provides a nice continuous profile which can be compared to other drill holes and to outcropping information. In the case of Doig & Stanmore (2012) this has completely redrawn the stratigraphy of the upper Clarence-Moreton Basin.

Reviewed Clarence-Moreton Basin stratigraphy after Doig & Stanmore (2012)
I will go into more detail in future posts but I note that Doig & Stanmore (2012) have made some major changes to the Grafton Formation. In particular, they have identified two new distinct members of the formation. The Piora Member and the Rappville Member. As for the underlying Kangaroo Creek Sandstone, this spatially and significant unit has been demoted simply to a member of a newly proposed formation called the Orara Formation. The Orara Formation itself has two distinct formations the demoted Kangaroo Creek Sandstone Member and the new Bungawalbin Member. (See figure 2).

The Woodenbong beds don’t get a guernsey at all in this paper. I suspect that this is because it would better fit into either the Bungawalbin Member of the Kangaroo Creek Sandstone or the Piora Member of the Grafton formation. More work needs to be carried out to make it more certain.

Clearly we do not understand much about the Clarence-Moreton Basin. Even the shallowest geological components! Knowledge keeps improving the more people investigate. The paper provides further interest because identification of the stratigraphic units and geochemical data obtained provide an indication of the risk associated with groundwater resources and CSG production. So as usual, further blog posts are required.

References/bibliography:
*Doig, A. & Stanmore, P. (2012). The Clarence-Moreton Basin in New South Wales; geology, stratigraphy and coal seam gas characteristics. Paper presented at the Eastern Australian Basins Symposium IV, Brisbane.
*Wells, A.T. & O’Brien (1994). Geology and Petroleum Potential of the Clarence-Moreton Basin, New South Wales and Queensland, Australian Geological Survey Organisation, Bulletin 241.

Monday, 28 April 2014

Clarence-Moreton Basin CSG Bioregional Assessment with some Philosophy


I was fortunate enough to be invited to a short presentation on hydrology and coal seam gas in the Clarence-Moreton basin last week. It was particularly good, in part, since lunch was provided and one of the presenters from the CSIRO ended up being someone I knew but had not seen for nearly a year. The topic of the presentation was an assessment that has recently commenced on the effects of coal seam gas (CSG) on water resources. Alas, it is something that the media has all but ignored. So a bit of information and a bit of philosophy in the blog post today!

This year a large investigation (a bioregional assessment) into all the possible effects of CSG on water commenced in earnest. It is a project funded by the Federal Government with many scientific project partners including the CSIRO. The project is based exclusively in the first case, on the compilation of scientific information. It is at arms-length from government and politics, so it is entirely technical. Therefore, this assessment is something which I personally find interesting and feel is of great value. The project scope has been set up by the Independent Expert Scientific Committee on Coal Seam Gas and Large Mining Development. The committee was established in 2012 and works under the authority of the Environmental Protection and Biodiversity Conservation Act 1999. A link to the CSIROs summary of its involvement can be found here.

The Clarence-Moreton basin bioregional assessment itself is one part of many bioregional assessments in numerous Australian coal basins. These assessments are themselves divided up into many different components including hydrogeology, ecology, ecotoxicology, environmental protection and many others. The presentation that I attended was specifically related to the hydrogeological modelling that is being developed. It briefly covered the different data sources and data limitations that were going to go into the modelling. It was good to see the thoughtfulness and consideration given to all the hydrogeological issues. Sometimes just figuring out what needs to go into a model is very hard in itself… but by far the hardest task is making sure the modelling reflects the real world. This is because of the varying amounts of "weighting" required to each of the input variables.

However, one of the things that saddens me is the lack of media time this assessment has been given. Many people are concerned that not enough is known about CSG activities in our region or in Australia or even more broadly, around the world. The media tends to focus on the conflicts that are occurring and not on the advances in technical knowledge that will lead to better decision making in the near future. The media does not seem to like reporting on things that we are learning but instead increases the confusion about matters that could lead to social conflict. Conflict, not cooperation seems to sell newspapers these days.

I was also a little saddened by some questions that were asked of the CSIRO presenters. One (Environmental Economics and Policy Academic!) asked whether it was ethical to undertake this assessment because it may lead to a CSG development being regarded as “safe”. To consider an increase in human knowledge of the world in which we live un-ethical is a big worry for me. Especially from a senior academic. In many ways it questions the very basic concepts of scientific endeavour. Having a scientific background, I feel we should not avoid learning something new because the facts that may arise could potentially contradict with a pre-determined world view. We are of-course moving from science to philosophy. I know my philosophical motives in life are to use knowledge to give the best outcomes for the environment and people that live in our region.

So, to end on this philosophical note: I recommend thinking about the knowledge that we have and how we use or ignore it. The media practice of looking only at conflict and dumbing down its stories on scientific and technical matters is well entrenched. I’m starting to genuinely believe that the media is making it harder to distinguish between facts and opinions purely in the media’s self-interest of creating a story to make money from. Recognising this is helpful to understanding where scientific information can guide us in the right decisions, as such I provide here a link to an ABC presentation on the media by an excellent modern day philosopher (one of my favourite non-science authors) Alain De Botton.

Sunday, 2 February 2014

List of Natural Gas Posts

To try and bring some order to some subjects that have been dealt with in previous posts I think it would be useful to create some list posts. This first list is about a subject that is very topical at the moment, natural gas. Natural gas includes so called "unconventional" gas such as coal seam gas (CSG), shale gas, tight gas.

Posts on "conventional" gas
Posts on coal seam gas
Posts on shale gas
Posts on tight gas
Posts on other unconventional gas

Saturday, 23 November 2013

A non textbook example

Text books are wonderful. They always have excellent ‘text-book’ examples! These show how a scenario can be interpreted and what information is used in that interpretation. As you get to know the textbook you get a feel for most or all of the information you can obtain to give you an answer. However, in geology many of the techniques are rarely all applicable to every field situation; or if they are they are applicable, they are unreasonably difficult to use.I have recently experienced one such example in an area south-west of Byron Bay. There is very little information available to interpret and therefore the possibility of misinterpretation can be high.

Byron Shire Council recently did some road works along a section of road between the village of Newrybar and the coast. This work refreshed some small road cuttings (road cuttings are geological tourist attractions). I took a close look at one of the road cuttings on the very edge of the Alstonville Plateau. The rock in this cutting was clearly different from the overlying and dominant Cenozoic aged basaltic lavas that make up the plateau. The exposure was made up of conglomerate.

Conglomerate is a sedimentary rock most often associated with high energy river environments. In this case the conglomerate contained clasts made from other older rocks that occur elsewhere in the region. This included chert, quartzite and fine to medium grained sedimentary rocks such as sandstones and siltstones. The rock though had been quite weathered and the sedimentary clasts had become quite broken down even though they retained their shape insitu.

Conglomerate near Newrybar on the road to Broken Head and Byron Bay
note the different clast types and sizes - typical of the Laytons Range Conglomerate
There is nothing particularly special about this conglomerate. Here the mapping indicates that I was at the very edge of the Clarence-Moreton basin and therefore the oldest rocks of the basin would be likely to outcrop. Indeed, the oldest rock in the basin is known as the Laytons Range Conglomerate. This outcrop looks very much like it. But… further to the east (for example on Broken Head road) are rocks of the Ripley Road Sandstone. These are younger rocks of the Clarence-Moreton basin than the Laytons Range Conglomerate. The Ripley Road Sandstone contains small layers of pebble conglomerate but nothing compared to that exposed in the road cutting. Weirdly this means that the current mapping of the basin indicates that the Ripley Road Sandstone should be older than the road cutting rocks. This is the opposite of the known sequence of the area. To make the road cutting conglomerate fit there is several hypotheses:

  1. The conglomerate in the cutting is actually not part of the Clarence-moreton basin but was deposited more recently and then covered by basalt. Maybe it was a pre-volcanic river system,
  2. The conglomerate in the cutting is actually part of a younger Clarence-Moreton basin unit that has needs to be redefined to include this particular type of conglomerate.
  3. The depositional structure of the Clarence-Moreton Basin is different in this area to the current model e.g. the road cutting is on the western side of a small sub basin.
  4. Faulting or folding has up-thrown the conglomerate in this area giving the impression that it is stratigraphically higher
  5. Other reasons I cannot think of at the moment

The only trouble is there seems to be inadequate information and field exposure to narrow down the possibilities. I’d love to get a drill rig and core a 200m interval but who has a spare hundred thousand dollars to do that?!

For the time being all I can do is assume the conglomerate was deposited sometime during the formation of the Clarence-Moreton Basin maybe as long as 250million years ago or deposited sometime before the Cenozoic basalts of the Alstonville Plateau possibly 40million years ago.

Alas, there is not enough information available to interpret this situation. But this is normal! We rarely are lucky enough to get a text-book example. In science the examples we are most confronted with are incomplete and generally frustrating. We can’t lie to ourselves that we can answer every question and know everything.

To the lady that stopped, looked at me curiously, and then asked me if I was “alright?” when I was examining the road cutting: Yes, I’m alright. But I still want to know the answer.

Saturday, 1 June 2013

The Koukandowie Formation has a cool Name

Previously I’ve completed blogs on the stratigraphy of the upper units of the Clarence-Moreton Basin. These upper units have been the Grafton Formation (youngest at Late Jurassic), Woodenbong Beds, Kangaroo Creek Sandstone and Walloon Coal Measures including the Maclean Sandstone Member of that unit (Middle Jurassic). Now, as we get towards the middle units of the basin we get into the Early Jurassic with much more complexity to the mode of formation of the geological units. Because of this the stratigraphic units have been divided into groups, subgroups, formations and members. The First one that I will tackle is the Koukandowie Formation, which is part of the Marburg Subgroup which in turn is part of the Bundamba Group.

The Koukandowie Formation actually is made up of an additional three members known as the Heifer Creek Sandstone Member, Ma Ma Creek Member and Towallum Basalt. But I’ll focus on these individually in future posts, for the time being it is worth noting that the Towallum Basalt is a very important unit for understanding the relative age relationships of all of the units in the Bundamba Group. For the time being I’ll focus on the Koukandowie Formation specifically.

Bundamba Group with conglomerate and abundant organic fragments - Tabulam
Unfortunately I do not have a photo specifically of the Koukandowie Formation. But I have attached a photograph a similar type of rock as the Koukandowie of the an undifferentiated part of the Bundamba Group.

The Koukandowie Formation was deposited in a dominantly fluvial (riverine) environment. Essentially the unit is comprised of sets of channel lithic sandstone (sandstone made from fragments of older rock) with some finer grained rock such as siltstone and even shale. But the formation also thin layers of conglomerate or occasional woody fragments that have turned into coal. The way the lithic sandstone was deposited means that a feature known as cross-bedding is very common and this structure is further evidence of its fluvial origin. The exact nature of these particular cross-bedding structures it interpreted by Wells & O'Brien 1994 as meaning that the river system that created the Koukandowie Formation was not a meandering stream but fairly straight. A modern example might be the middle reaches of the modern day Clarence River.

A rough stratigraphic guide to the Bundamba Group
(Walloon Coal Measures are above and Gatton Sandstone under)
The Koukandowie Formation was considered an important formation for gas and oil exploration in the region. The Koukandowie was thought to be a generally an impermeable unit, that is, stops the migration of fluids and gases such as oil and natural gas. This means that the underlying units of the Bundamba Group which are more conducive to forming and storing these gases and fluids may retain them in structural traps (such as folds in the earth or faults). How effective this unit has been seems to be a bit hit and miss. I understand that the NSW Government and some companies during the 1970’s and 1980’s had some success with this model but not enough to make it viable financially at the time. More recent work by exploration companies has shown this to be on its own not-viable. But when combined with similar modes of gas source rocks in the overlying Walloon Coal Measures, other more deeply buried organic rich units and other sources of gas directly from coal seams the economics seem to have looked good for some companies.

As for ground water sources, like the overlying Walloon Coal Measures the Koukandowie Formation does not contain much in the way of useful fresh groundwater. This is for two reasons:

  1. the finer grained components of the formation tend to contain more salt due to the some of the sedimentary depositional environment; and
  2. the Koukandowie Formation tends to show very little lateral porosity. This means that the water is stored in smaller localised aquifers of low long term yield. 

These reasons also imply the nature of recharge of what aquifers to occur in the area. Essentially vertical percolation from surface water through fractures is the main driver of aquifer recharge. Though there are exceptions due to the location of the sub-units in the Formation.

As for the name the Koukandowie Formation takes its name from Mount Koukandowie which is located near Nymboida. The formation outcrops in a relatively thin band in from the margins of the Clarence-Moreton Basin. I don't think that the formation outcrops anywhere in the middle areas the Clarence-Moreton Basin but certainly occurs at within the basin depth. The formation tends to weather and erode easily and therefore most of the outcrop of the unit shows relatively subdued landforms of rolling hills.

References/bibliography:

*McMahon, G.A. & Cox, M.E. 1996. The relationship between groundwater chemical type and Jurassic sedimentary formations: The example of the Sandy Creek Catchment, Lockyer, southeast Queensland. Mesozoic 96 Conference at Brisbane - extended abstracts.
*O’Brien, P.E. & Wells, A.T. 1994. Sedimentology of the Bundamba Group. In Wells, A.T. & O’Brien, P.E. 1994. Geology and Petroleum Potential of the Clarence-Moreton Basin, New South Wales and Queensland. Bulletin 241. Australian Geological Survey Organisation
*Wells, A.T. & O’Brien, P.E. 1994. Lithostratigraphic Framework of the Clarence-Moreton Basin. In Wells, A.T. & O’Brien, P.E. 1994. Geology and Petroleum Potential of the Clarence-Moreton Basin, New South Wales and Queensland. Bulletin 241. Australian Geological Survey Organisation.
*Wells, A.T., O’Brien, P.E. Willis, I.L. & Cranfield, L.C. 1990. A new lithostratigraphic framework of the Early Jurassic units in the Bundamba Group, Clarence-Moreton Basin, Queensland and New South Wales. B.M.R. Journal of Australian Geology and Geophysics. V11.

Saturday, 20 October 2012

Do you trust a geological map?

The NSW Geological Survey have produced the maps that we use today. They have recently placed all of them online for people to view which is... well... excellent! They can be found here. Some areas have excellent, up-to-date 1:100 000 scale maps which are exceptional. However, it is worth mentioning that the best scale you will find for most of the state is 1:250 000 older 1970's maps. These maps are good but they were mostly done through looking at aerial photographs with limited field checking and since nearly 40 years have passed our understanding of the rocks has changed and this means that geological maps can be misleading if you are not careful.

Geology according to the current published maps
(after Brunker et al 1972)- scale approximate

I recently had the opportunity to be involved in a project looking for clay deposits in The Channon / Dunoon area. During the project it became obvious that the geology was not what was mapped (to the left is the geology that was mapped in 1972). The investigation that I was lucky enought to be involved with was pretty simple it just involved an excavator digging a few holes in the ground (testpits). Importantly I had an experienced Engineering Geologist to show me what was going on.

Rock weathers to form soils but there is rarely a distinct boundary between soil and rock, a transition occurs. This transition zone is called the regolith which lies below the soil proper at the surface, it is the  transition into saprolite (weathered rock) and then to unweathered rock. If the weathered rock was derived from shales, mudstones and other fine grained sediments then often these layers will become clay. It was this clay that was looked for.

A better interpretation following the testpit investigation
scale approximate
What was done was to dig into the regolith and depending on the characteristics of the saprolite it would be possible to tell what the original rock would have been. From the mapping it was assumed that what we would find would be related to the Lismore Basalt or Kangaroo Creek Sandstone. What was found was neithers. Instead layers of clayey and silty material and bands of weathered coal were visible as well as lithic sandstone. Coal would certainly not occur in abundance in volcanic rocks like the Lismore Basalt and nor does it occur in the Kangaroo Creek Sandstone. Lithic sandstone is also absent from these units. What must have found was lots more of the Walloon Coal Measures.

From my understanding of the area around Dunoon and on the basis of what was found during the hole digging exercise I put together a  rough new map of the area (the second map above). As you can see there is actually a fair amount of difference. So, don't take it for granted that when you look at a geological map it is exactly right. It should be used as a guide and your knowledge should be applied to check it. The amount of coal we found was so abundant that a discussion about this is probably worth another post in the future.

References/bibliography:

Brunker R.L., Cameron R.G., Tweedale G. and Reiser R., 1972, Tweed Heads 1:250 000 Geological Sheet SH/56-03, 1st edition, Geological Survey of New South Wales, Sydney

Friday, 14 September 2012

Walloon Coal Measures of the Southern Clarence-Morton Basin

In previous posts I’ve briefly discussed the upper most layers of the Clarence-Moreton Basin. The Grafton Formation which overlies the Kangaroo Creek Sandstone which in turn overlies the Woodenbong Beds/MacLean Sandstone Member. The MacLean Sandstone Member is a member of a larger unit called the Walloon Coal Measures and it is this unit that I will briefly comment on now.

I’ve often heard people mistakenly say that the Walloon Coal Measures is a coal seam. This is not correct because the balance of the unit is actually made up of mixed rocks. According to Wells & O’Brien (1994) the coal measures include sandstones (made from volcanic rock fragments), carbonaceous siltstone, shale, mudstone, coal and clayey siltstones. Also clayey ironstone and infrequently oil shale and limestone can be found. Apparently tree stumps remaining in their growth position have also been found, though these have become carbonised (coal). The coal layers themselves are thin (millimetre scale) to occasionally thick (30-40cm) in the Southern Basin but the whole unit of all the different rock types that make up the Walloon Coal Measures totals at least 200 metres of thickness and is variable from location to location.

The coal in the measures is formed from peat that grew in a moist but temperate environment during the early to middle Jurassic in this area (smack in the middle of the age of the dinosaurs). The depositional environment appears to have been mainly flood-plain and meandering stream environments. Boggy mires forming the peat were common, but layers of volcanic ash from occasional volcanic eruptions from close by are preserved. This makes some of the coal seams high in ash content which reduces the quality of the coal. The environment was thought to be reflective of a period of high sea level.

The Walloon Coal Measures in Bexhill Brick Pit at Bexhill
Interestingly, the Walloon Coal Measures are some of the most extensive and continuous sedimentary rock formations in eastern Australia. They are correlated with almost identical units in the Surat Basin and the Maryborough Basin making the potential spatial extent of the unit huge. The outcrop of the Walloon Coal Measures is fairly limited with much obscured by the Grafton Formation, Kangaroo Creek Sandstone and Woodenbong Beds as well as Cenozoic aged volcanic rock especially associated with the Focal Peak and Tweed Volcanic areas. In our region the best exposures are in the Nimbin area and further north but also at Coaldale where the Clarence-Moreton Basin has been deformed creating a bulge which has been eroded exposing the Walloon Coal Measures. Areas to the south of MacLean show some outcrop and on the other side of the Basin, the Kangaroo Creek and areas near Tabulam show good exposures. Other places have exposures of the Walloon Coal Measures because of local faulting and folding that has occurred in places like the Richmond Range.

I understand that coal mining was historically carried out near Tabulam, Kangaroo Creek and Nimbin but the size of the deposits was such that these were only small and fairly short lived enterprises, though Murwillimbah did have a power station earlier last century which was fueled on local coal transported from the area around Tyalgum. Of course now the Walloon Coal Measures has been frequently under discussion regarding its gas potential especially in the form of coal seam gas (CSG) also known as coal bed methane.

The presence of gas in the coal measures is a natural function of coal and the formation of coal when it was formed. As the rock is gently ‘cooked’ following its deposition as peat gases are given off. Peat is made from decayed plant and animal matter which when broken down into its elemental constituents is mainly hydrogen (H) and carbon (C) atoms. The hydrogen is bonded to the carbon in oxygen poor environments and forms methane (CH4) and sometimes more slightly moe complex organic molecules such as C2H6, C3H10 etc, or if conditions are right the molecules are big enough and complex enough to form oils. In the case of the Southern Clarence-Moreton Basin Walloon Coal Measures the conditions were too hot for oil to be stable so the smaller gas molecules are formed. Gas may be trapped in the layers of coal within voids and cracks (called cleats) or they may sometimes migrate to other layers where they can be trapped. This is actually the difference between ‘conventional’ gas and coal seam gas, i.e. all conventional gas was once coal seam gas. Oil shale and shale gas are also present in some areas of the Walloon Coal Measures but these are very rare and are small deposits (I might do a post on these in the future but given their insignificance I might not get there). Russell 1994 noted that the best quality gas, mature or 'dry gas' was likely to be found abundantly in the eastern portion of the basin, whereas wetter gas and oils were likely to be more prevalent in the west. Interestnigly it is thought that the maturity is a response to the thermal changes in the Earths crust during the formation of the Tasman Sea.

The Walloon Coal Measures contains both conventional and coal seam gas and very little oil. Indeed, I understand that substantial amounts of conventional gas was first discovered in the Hogarth Ranges about 40 years ago and that more recently Metgasco have discovered significant amounts at Kingfisher which I think is to the south of Casino. As far as coal seam gas goes, if Walloon Coal Measures are present there is coal and so there is also a chance that gas may also be present.

References/bibliography:

*O’Brien, P.E., Korsch, R.J., Wells, A.T., Sexton, M.J. Wake-Dyster, K. (1994) Structure and Tectonics of the Clarence-Morton Basin. In Wells, A.T. and O'Brien, P.E. (eds.) Geology and Petroleum Potential of the Clarence-Moreton Basin, New South Wales and Queensland. Australian Geological Survey Organisation. Bulletin 241.
*O'Brien, P.E., Powell, T.G. & Wells, A.T. (1994). Petroleum Potential of the Clarence-Moreton Basin in Wells, A.T. and O'Brien, P.E. (eds.) Geology and Petroleum Potential of the Clarence-Moreton Basin, New South Wales and Queensland. Australian Geological Survey Organisation. Bulletin 241.
*Russell, N.J. 1994. A Palaeogeothermal study of the Southern Clarence Moreton Basin in Wells, A.T. and O'Brien, P.E. (eds.) Geology and Petroleum Potential of the Clarence-Moreton Basin, New South Wales and Queensland. Australian Geological Survey Organisation. Bulletin 241.
*Wells, A.T. and O'Brien, P.E. 1994. Lithostratigraphic framework of the Clarence-Moreton Basin. In Wells, A.T. and O'Brien, P.E. (eds.) Geology and Petroleum Potential of the Clarence-Moreton Basin, New South Wales and Queensland. Australian Geological Survey Organisation. Bulletin 241.

Saturday, 1 September 2012

Who has heard of the Belmore Volcano?

Most of us know about the two large remnants of volcanic provinces in the region, one the Tweed Volcano and the other the Ebor Volcano. Many too will know that the Tweed Volcano erupted first (23 million years old) and as the Earths crust moved over the mantle the probable hot-spot that caused this volcano migrated further south and formed the Ebor Volcano (19 million years old). Few people will have heard of the Belmore Volcano, this is a volcanic area that is located roughly midway between the Tweed and Ebor volcanic provinces and it also erupted in the interval between the other two (21 million years).

Before I go on I should point out that the term volcano is used very loosely here as it may also consist of many active cones and vents which erupted at a similar time period and are related to each other. Indeed the definition of what a volcano is defined as (such as the terms central volcano and volcanic province) has been an on-going argument for a long period of time anyway!


Trachyte makes up Dome Mountain in the Fineflower area
The area of the Belmore Volcano is away from the main travelled routes and for that reason it has probably been relatively unnoticed for a period of time. It lies to the east of the village of Baryulgil in the southern areas of the Belmore State Forest and Mount Neville Nature Reserve which is about halfway to Coaldale as you head towards Grafton. It is near the southern extents of the Richmond Range. The volcanics have produced some very interesting and rugged landforms such as Dobie Mountain, Mount Mookima, Mount Neville and Dome Mountain.

Most of the lavas have been eroded away but many eruptive sources for the volcano have been identified including plugs, pipes, dykes and possibly some sills. The lavas and intrusion preserved were erupted through the rocks of the Mesozoic aged Clarence-Moreton Basin which outcrop in the area as the Kangaroo Creek Sandstone and Walloon Coal Measures (probably including the MacLean Sandstone Member), but get older as you head west towards the edge of the Basin. The Mesozoic rocks in the area is actually quite deformed (as far as the Clarence-Moreton Basin goes) with large north-south trending folds and several faults nearby. The folds are visible as ridges and valleys (except those landforms associated with the more recent Belmore volcanics).

The Belmore Volcano is interesting because it shows the migration path of the hot-spot that formed the volcanoes that occur along the northern rivers area. There are actually four recognised volcanoes/volcanic provinces. These are all evenly spaced both in distance and time of eruption. From north to south these are the Tweed (23Ma), Belmore (21Ma), Ebor (19Ma) and Comboyne (16Ma) with the migratory trail of the hot-spot lost after this point. Sutherland et al. (2005) demonstrates that the Belmore Volcano is also curious because of the lava type erupted, whereas the other volcanoes erupted mainly more mafic volcanics (basalts and andesites) with later minor more felsic phase (rhyolite, dacite and trachyte ), the Belmore had very little basalt but lots of trachyte. But Isotope analysis by Sutherland et al (2005) has shown that the Belmore Volcanics were associated with the same mantle plume that generated the other volcanoes listed above.

Like most other recognised volcanoes in the region there is an earlier basalt type rock which occurs in the area which appears to have little to do with the most recent volcanic rocks. This is no exception in the Belmore area, where a basalt (dated at 31Ma) is present just to the north of the main eruptive area. Very little is known about this earlier volcanism and how it ties in with the geological history of the region.

References/Bibliography:

*Sutherland, F.L., Graham, I.T., Zwingmann, H., Pogson, R.E. & Barron, B.J. 2005. Belmore Volcanic Province, northeastern New South Wales, and some implications for plume variations along Cenozoic migratory trails. Australian Journal of Earth Sciences V52.

Thursday, 26 July 2012

Why you won't find CSG here now

As you might have noticed there has been an occasional blog post that I’ve done dealing with coal seam gas matters in a cursory manner. I’ve been asked again and again by many people to explain aspects of the industry and the environmental issues associated with it. I’ve worked in coal exploration and in an environmental capacity before and I know a moderate amount about gas extraction too but I’m afraid I don’t have all the answers. Caution is needed especially given the highly political nature of the subject now. Therefore, I don’t really want to weigh into the subject, but I’ll have a very quick comment or two just to really outline the big picture. In the last week I cautiously commented in the Northern Star online twice as the avatar ‘GeologyRod’ just to correct a couple of mistakes people have made. I’ve also written one letter to the editor cautioning about how to interpret water chemistry. Given the heated debate, I’m not sure I will do so again!

From what I understand of the coal seam gas industry and the geology directly applicable to the area I am not as concerned about the industry doing damage to groundwater sources or surface water as some. From my contaminated land experience, I do however; see two potentially serious environmental problems. These are failure of well casings causing local cross-connection of poor and good quality water (and gas) and the disposal of poor quality production water (salinity is the biggest problem, as the chemicals potentially used can easily be treated but salt is hard to get rid of).

Considering a risk assessment approach (using the possible outcome and likelihood of that outcome) provides many scenarios with only the two mentioned above displaying an elevated level of risk (in my very hastily developed opinion). The nature of the geology of the southern Clarence-Moreton Basin is such that regional scale ground water contamination touted as a problem by many is probably of negligible risk, though this may occur elsewhere in eastern Australia in places like the Surat and Gunnedah Basins. However, local groundwater contamination (with a chance of affecting someone’s water supply bore) is probably on the moderate to high side. The disposal of salty water poses a moderate risk to the environment through adversely affecting large areas of pasture which might be irrigated or a moderate to high level if discharged untreated directly to fresh water streams.

Both of the matters outlined above are difficult to deal with and not knowing about the ins and outs of operators in the region I don’t know how the companies are going to mange these problems. This is ignorance on my part. I can only assume that this has been considered in detail (a legal requirement) so that the management of these problems is adequate.

This is my opinion only and given that opinions can get one in trouble I won’t be commenting on any other matters CSG related for quite some time. I really don’t like getting involved in political matters and it is easy to be carried into them. I hope I haven't been carried into them too far already. If you want to know a bit more about the technical side of coal seam gas extraction and the pollution risks there are some good fact sheets put out by the CSIRO linked to here. Maybe that is why I like rocks so much, they don’t argue with you (too much).

But back onto happier topics. I’ve been most excited by some new information that has come my way, one a University of New South Wales thesis by Leonary Drury on the Richmond Valley stratigraphy, groundwater, dating and much more, and the other is the preliminary geophysical data package released by the NSW geological survey. I’ll be blogging on these topics (plus others) in the coming months.

Monday, 23 July 2012

Geological diversity of the Toonumbar Dam area

Toonumbar Dam is a lovely area that, like so many other places, wish I could visit often. It would be lovely to relax around the dam, maybe stay the night camping or in a cabin. When I last visited, I was rather pathetic... I was looking at the rip-rap on the dam wall and trying to figure out where it was likely to have been quarried! I later found out and visited the quarry to obtain samples and look for structures. But that is a story for another day. As I was saying, the dam is a lovely place and like many beautiful places owes itself to the geological conditions of the area.

The oldest rocks (Mesozoic aged Clarence-Moreton Basin) exposed in the area are actually exposed downstream from the dam itself. Several hundred metres downstream are poor exposures of what appears to be rocks of the Jurassic Walloon Coal Measures, immediately downstream (and all around the dam) is the Kangaroo Creek Sandstone which is obvious to identify up close. The rocks which are apparently of the Walloon Coal Measures are a little harder to distinguish. It is possible that they are members of the MacLean Sandstone (which are considered part of the Walloon Coal Measures) or maybe Woodenbong Beds or even the underlying Bundamba Group but they are certainly younger than the Kangaroo Creek Sandstone.

Inclined bedding in Kangaroo Creek Sandstone
In Iron Pot Creek below the dam. Cross-bedding is also evident
It is worth noting the bedding plains in the sedimentary rocks if you are downstream of the dam. The plains are actually inclined to the west in this area and the further you go down stream the flatter the beds become, then they tilt back the other way (eastward) for a short distance. This is actually a large basin structure called the Toonumbar Anticline (the top of a fold in the rock layers). Another structure, much bigger and of regional significance is located only another couple of kilometres to the east. This is the East Richmond Fault which extends into southern Queensland and down almost to Grafton. I have actually never seen evidence of this fault in the field, but there is geophysical evidence for it and I'm assured it is there. Apparently the fault is much more evident further south between the villages of Mummelgum and Mallanganee.

The large rugged hill and ridge about 5km north of the dam is made from basalt lava, I'm not sure of the exact composition of this rock but it is likely to be part of the Kyogle Basalt which is associated with the Focal Peak Volcano. Interestingly, I think that the basalt is likely not to have been sourced from the actual peak of the volcano but from a distant vent on the side. This is because a few kilometres to the north west just on the north side of the lake is actually one of at least two intrusions of gabbro (the intrusive equivalent of basalt) near Toonumbar, one of these is crossed by Murrays Scrub Road. It is possible that these intrusions were the feeder systems for vents which erupted the Kyogle basalt in this area. This probably demonstrates the nature of volcanism in the area during the Cenozoic period. It seems apparent that the central volcano models of the Focal Peak and even the Tweed Volcanoes appears to be a bit too simplistic.

But, whether you are interested in geology or just enjoy the forests of the Northern Rivers, a trip to Toonumbar Dam is worth while.

Note that the stratigraphy of the Kangaroo Creek Sandstone has been revised since this blog post. See the this post for details.

References/Bibliography:

*O’Brien, P.E., Korsch, R.J., Wells, A.T., Sexton, M.J. Wake-Dyster, K. (1994) Structure and Tectonics of the Clarence-Morton Basin in Wells, A.T. and O'Brien, P.E. (eds.) Geology and Petroleum Potential of the Clarence-Moreton Basin, New South Wales and Queensland. Australian Geological Survey Organisation. Bulletin 241.
*Bell, A.D.M. (1968). Report on the geology of Toonumbar Dam and Appurtenant Works. Water Conservation and Irrigation Commission.

Sunday, 15 July 2012

Who has the answer? Woodenbong, MacLean, Grafton and a Kangaroo Creek

How well do we understand how the Clarence-Moreton Basin was formed? We know a little but not much about areas have never been drilled to understand the stratigraphy. A good example of our lack of geological understanding is the areas to the north and west of Kyogle, Bonalbo, Urbenville, etc. This area on the most recently published geological maps includes the area referred to as the Woodenbong Beds. We know very little about this particular formation.

It was actually Queensland based geologists (Exon et al. 1974) that first named the Woodenbong Beds. Exon et al (1974), (although according to the stratigraphic names database Coote (1986) is considered the first reference) described the lower portion of the Woodenbong Beds as massive to medium bedded pale-grey, fine to coarse grained, cross-bedded, labile (easily decomposed) sandstone. The upper portions were described as fine-medium grained feldspathic sandstone with siltstone, mudstone and minor coal. Stratigraphically, Exon et al (1974) also suggested that the Woodenbong Beds were lateral equivalents of the Kangaroo Creek Sandstone and/or the Grafton Formation. The boundary between the underlying Walloon Coal Measures was also described as conformable (that is, no significant time gap between deposition of the units).

Woodenbong beds possible stratigraphic relationships
Subsequent authors such as Wells & O'Brien (1994) have followed on with the definition provided by Exon et al (1974), who extrapolated the interpretation of the Woodenbong Beds to suggest that they may actually be equivalents of the Injune Creek Group (Springbok Sandstone and Westborne Formation) in the Surat Basin.

However, in the very same volume of work as Wells & O'Brien (1994) a different author, Willis (1994) proposed that the Woodenbong Beds actually underlie the Kangaroo Creek Sandstone (and therefore Grafton Formation), suggesting that the MacLean Sandstone Member of the Walloon Coal Measures was equivalent to the Woodenbong Beds. Willis (1994) also cited other authors such as (McElroy 1963, Ellice-Flint 1973 and Scott 1982 (note I have not seen these three publications)). These authors contradicted Exon et al 1974, and Wells & O'Brien 1994 by indicating that the boundary between the underlying Kangaroo Creek Sandstone is in places disconformable/unconformable (meaning there is a hiatus of deposition or a period of erosion preceding the formation of the Kangaroo Creek Sandstone).

The only thing all of the above authors agree on is that the composition of the Woodenbong Beds is very different from the Kangaroo Creek Sandstone and Grafton Formation. I'm sure you would agree that we obviously need more information to figure this one out!

Note that the stratigraphy of these formations have been recently revised since this blog post. See the this post for details.

References/Bibliography:

*Wells, A.T. and O'Brien, P.E. 1994. Lithostratigraphic framework of the Clarence-Moreton Basin. In Wells, A.T. and O'Brien, P.E. (eds.) Geology and Petroleum Potential of the Clarence-Moreton Basin, New South Wales and Queensland. Australian Geological Survey Organisation. Bulletin 241.
*Wells, A.T. and O'Brien, P.E. (eds.) 1994. Geology and Petroleum Potential of the Clarence-Moreton Basin, New South Wales and Queensland. Australian Geological Survey Organisation. Bulletin 241.
*Willis, I.L. 1994 Stratigraphic Implications of Regional Reconnaissance Observations in the Southern Clarence-Morton Basin, New South Wales In Wells, A.T. and O'Brien, P.E. (eds.) Geology and Petroleum Potential of the Clarence-Moreton Basin, New South Wales and Queensland. Australian Geological Survey Organisation. Bulletin 241.

see *Wells, A.T. and O'Brien, P.E. (eds.) 1994. Geology and Petroleum Potential of the Clarence-Moreton Basin, New South Wales and Queensland. Australian Geological Survey Organisation. Bulletin 241.  for other cited authors.

Wednesday, 13 June 2012

At Nashua where chert should not be

In an earlier post, Booyong not in the Clarence Moreton Basin? I indicated that I had been informed that there was evidence of Palaeozoic sedimentary rocks near Booyong, and that if this is the case there is significant implications on the morphology of the Mesozoic aged Clarence Moreton Basin in the area between Byron Bay and Lismore. It therefore has implications for the exploration for coal seam methane too.

Well, I can confirm that after much searching, I came across an ephemeral creek north of Booyong near the Casino to Murwillimbah Railway line at Nashua that clearly contained much chert. Additionally, a railway cutting appeared to have significant folding, but was very weathered so identification of the parent rock and indeed even whether it was folding was not clear.

Chert at a location between Nashua and Booyong
Chert is a rock that is essentially absent from the Clarence Moreton Basin, however, it is common in the underlying rock of the Beenleigh Block, known as the Naranleigh-Fernvale Group. This group of rocks formed in a deep marine environment. It consists of turbidite sediments that occur when parts of the undersea continental slope erode and some slates and chert. The Chert is formed on the ocean floor where chemical and biological material settles over a long period of time. All of this rock was then transported and accreted onto the edge of the Australian Continent before the Devonian or Carboniferous period which was around 333-343 million years ago during the formation of the New England Orogen. This process of accretion has caused folding and low grade regional metamorphism to be common place in this geological unit. By comparison, the sediments of the Clarence-Moreton Basin are dominately continental derived and are un-metamorphosed. They were mainly deposited in river systems, lakes or at best shallow marine environments. Chert does not form very well in these environments.

But, what is so exciting about this outcrop? The Neranleigh Fernvale Group occur along the edge of the hills above the coastal plain south of Ballina and are exposed just about everywhere from the Gold Coast to Byron Bay. If you follow the line of outcrop from near Ballina you will find it is overlain between Byron Bay by the Clarence Moreton Basin which extends all the way to the Tabulum in the west. But because the outcrop occurs at Nashua this shows us that the area to the east is probably a different basin from the main part of the Clarence Moreton to the west. This has significant implications for understanding the structure of the earth here and also affects where resources such as gas can be explored for. For those that were worried about coal seam gas, you won't find any at Nashua.

Saturday, 19 May 2012

Rocks named after a creek named after an Australian marsupial

Note that the stratigraphy of this formation has been revised since this blog post. See the this recent post for details.

One of the most widely outcropping rock units of the mesozoic aged Clarence Moreton Basin is the Kangaroo Creek Sandstone named after its type locality at Kangaroo Creek in the Nymboida area. It is also one of the most recognisable stratigraphic units in the basin.

McElroy (1963) showed that the Kangaroo Creek Sandstone consisted mainly of white to cream coloured quartz sand. The texture of the sandstone is saccharoidal, that is, it has a glistening sugar like appearance of the quartz sand grains. This sand glistens more than usual because while buried, fluids in the rock caused extra silica (quartz) to crystallise on the existing sand grains creating new tiny crystal faces that reflect light in a vivid way. The nature of the rock in this formation tends to weather less readily than other units and as a result tends to form prominent topographic features such as hills, cliffs, ridges and the like.

Crossbedding and typical saccharoidal texture in Kangaroo Creek Sandstone


The Kangaroo Creek Sandstone was deposited in a fluvial (river) setting and as a result cross bedding structures are very common in outcrops. Sorting of grains in the unit is very well developed, that is, the grain size is very similar at any particular outcrop. Additionally, the thickness of the beds is very consistent which together indicates that the tectonic setting was relatively unchanged through the period of deposition. Following burial of the sandstone fluids present in the rock caused extra dissolved silica to precipitate out onto the existing sand grains filling in voids and creating the characteristic texture.

The Kangaroo Creek Sandstone is considered by some authors (Wells and O'Brien 1998) to grade into the Woodenbong Beds in the north west of the NSW portion of the basin. However, it is noted that others (Willis 1998) consider the Woodenbong Beds the equivalent to the McLean Sandstone Member of the Walloon Coal Measures (but more about this in future post). The Kangaroo Creek Sandstone underlies the Grafton Formation but the contact with this formation is gradational. According to (Wells and O'Brien 1998) it also sometimes shows a conformable boundary with the underlying Walloon Coal Measures, however, in most areas the boundary is shown by an unconformity. It is easy to tell the difference however, because compositionally any sandstones in the Walloon Coal Measures are composed of feldspar and lithic grains rather than the quartz of the Kangaroo Creek Sandstone.

Outcrop of Kangaroo Creek Sandstone on the Clarence River near Grafton
It is interesting to note that the recrystalisation of quartz in the Kangaroo Creek Sandstone means that this unit is now essentially dry with respect to Ground Water. There is very few spaces left for the water to travel through. for example O'Brien et al (1998) shows that most other sandstones in other basins such as the Great Artesian Basin, is where most ground water is obtained. In fact, in the whole of the Clarence Moreton Basin the only unit to have useful ground water bores is the Grafton Formation which is recharged from rainfall. The Kangaroo Creek Sandstone does have some bores that produce a very little water in the upper most portion of the unit (probably rainwater recharging fractures in these locations (Kwantes 2011), like the overlying Grafton Formation) but it appears that no other bores obtain water from the Kangaroo Creek Sandstone because the formation actually behaves like an aquiclude or aquitard. Water is not obtained from aquifers below the Kangaroo Creek Sandstone because the water quality is generally poor.

It is interesting to note that according to some gas exploration results it is apparent that areas of the Kangaroo Creek Sandstone (assuming this is not mistakenly identified McLean Sandstone) that are directly overlying the Walloon Coal Measures contain substantial areas of conventional natural gas. This is gas that has migrated from the underlying Walloon Coal Measures and been trapped in either pore spaces or fracture zones. I understand that several companies in the area such as Metgasco and Red Sky Energy intend to exploit these reserves.

Pollen spores in drill holes give an age of middle to late Jurassic for the Kangaroo Creek Sandstone (Wells and O'Brien 1998).

References/Bibliography:

*Kwantes, E. 2011. Future Water Strategy: Groundwater Options - Position Paper. Report for Rous Water by Parsons Brinkerhoff.
*McElroy, C.T. 1963 The geology of the Clarence-Moreton Basin. New South Wales Geological Survey, Memoir 9, 172 pp.
*Moran, C., Vink, S. 2010 Assessment of impacts of the proposed coal seam gas operations on surface and groundwater systems in the Murray-Darling Basin. The University of Queensland.
*New South Wales Government. 2010. State of the Catchment Report: Groundwater. Northern Rivers Region. Department of Environment, Climate Change and Water.
*Wells, A.T. , O'Brien, P.E. 1994 Lithostratigraphic framework of the Clarence-Moreton Basin In Wells, A.T. and O'Brien, P.E. (eds.) Geology and Petroleum Potential of the Clarence-Moreton Basin, New South Wales and Queensland. Australian Geological Survey Organisation. Bulletin 241.
*Willis, I.L. 1994 Stratigraphic Implications of Regional Reconnaissance Observations in the Southern Clarence-Morton Basin, New South Wales In Wells, A.T. and O'Brien, P.E. (eds.) Geology and Petroleum Potential of the Clarence-Moreton Basin, New South Wales and Queensland. Australian Geological Survey Organisation. Bulletin 241.

Thursday, 19 April 2012

The hiding peak at Glenugie forest

Some time ago Mark left a comment where he asked whether the basalt at Glenugie Peak (once known as Mount Elaine) was part of the Ebor Volcano. I didn't think it was likely but at that stage I did not know much about this peak, in fact I'd only glimpsed it through the trees while driving along the Pacific Highway to Grafton. Since then I've been trying to find out more about the peak, although I still have not had the chance to actually get there, staff from the New South Wales Geological Survey recently have reviewed the mapping of the area including the peak. What they observed reinforces my understanding that it is not related to the Ebor Volcano but the visit found out some very unusual things.

Glenugie Peak is hidden quite well by the forest all around as well as the lack of other hills to see it from. This means that it often goes unnoticed but if you have a look at a topographic map you will see that it is a very significant feature in the landscape. Before I learned what the rocks were here I thought it was likely to be an old flow of basalt from a period of volcanism that occurred before the chain of volcanoes from the East Australian Hot Spot. This is because there are many outliers of basalt that occur in the region that are too early for the hot spot volcanism. In addition, the old geological mapping of the area has Glenugie Peak being comprised of Tertiary aged extrusive Basalt. This contrasts with the surrounding rock which is the Grafton Formation of the Clarence Moreton basin.

I  came across Jopin (1968) who described a sample of the Glenugie Peak obtained from another authors petrographic analysis as Limbugite. I have heard of Limburgite before but I could not remember exactly what it was or the implications of such a rock type. I don't think I have ever even seen such a rock before. So, I had to look it up! Limburgite is essentially looks a like a basalt in hand specimen but contains no quartz and is so silica poor that not even feldspar is present in the rock.  Instead of feldspar (the most common rock forming mineral) other minerals called feldspathoids are present. This is termed silica under-saturation or ultramafic.

The NSW Geological Survey have now identified that the Glenugie Peak is intrusive and is a dyke, volcanic plug or similar. It has been intruded through the underlying sedimentary rocks of the Clarence Moreton Basin. Additionally, a review of mapping of the region that is being undertaken includes investigation of the rock composition at Glenugie Peak. The Investigation includes analysis of samples which identified two types of rock: Teschenite and Meltiegite. Teschenite and Meltiegite is quite consistent with the Limburgite classification by Joplin 1968. These two are also silica under-saturated rocks. The feldspathoid mineral in this rock is called nepheline.

So what, what does that mean? Well, these rocks are actually very unusual in the coastal region. Phonolite, a related but still not as silica-undersaturated (it is also higher in the elements sodium and potassium) as the rock found at Glenugie, occurs in the New England tablelands but this seems to be quite old in comparison to Glenugie Peak. These silica under-saturated rocks form where there is a significant thickness of continental crust allowing the bottom of the crust to partially melt (but not melt too much). The melted component then migrates and is emplaced either in more shallow crust or erupted to the surface. It is comparatively rare and unfortunately these rocks tend to weather easily making accurate chemical dating hard.

It seems that Glenugie Peak is made from a weird rock. I was very surprised (and excited) to see the unusual classifications that have been made. As far as I am aware this rock does not occur anywhere else nearby and even on an Australian scale is rare. When a fresh piece of rock is obtained the general appearance resembles basalt and therefore may be quickly passed over and forgotten. Luckily, the peak continues to be looked at and although nothing has been published yet it is exciting that more is being learnt about the geology of the region. Without the Geological Survey and university geology departments knowledge of our land would be so much less.

Knowing what I now do, the next time I'm spending some time in the Grafton area I'm going on a bushwalk to Glenugie Peak! Apparently it is within a flora reserve and is particularly good for bird spotting too.

Note: since writing the above post I have come across another early reference to Limbugite and Teschenite by Vallance et al (1969) who also refer to a 1919 description but unfortunately little extra information is given.

2nd note: since wrinting the above note I came accross a record from 1915 which includes analysis of apparently of one of the two types of rocks found at Mount Elaine. The geo-chemical classification of this rock (according to the TAS method) is a picro-basalt (essentiall a very low silica and very low sodium and potassium basalt).

References/bibliography:

Joplin, G. A., 1968, A Petrography of Australian Igneous Rocks, Angus and Robertson.
Valance, T.G., Wilkinson, J.F.G., Abbott, M.J., Faulks, I.G., Stewart, J.R., Bean, J.M., 1969, IX Mesozoic and Cainozoic Igneous Rocks, Journal of the Geological Society of Australia.V16.