Showing posts with label coal seam gas. Show all posts
Showing posts with label coal seam gas. Show all posts

Friday, 4 September 2015

Baseline CSG methane in groundwater

A friend recently let me know that a paper that one of his students wrote for the Journal of Hydrology had been published. I had a very minor involvement in the formative stages of the paper which came about indirectly as a result of the protests of many local people about potential coal seam gas (CSG) and other natural gas types in the region. The paper (Atkins et al 2015) is essentially the results of a data collection exercise but has some interesting techniques and findings about the baseline concentrations of gas in groundwater bores in the Richmond Valley area.

Methane concentration for different geological environments
(after Atkins et al 2015)
91 water samples were collected from government and private bores in geological units overlying the target CSG geological formations in the Clarence-Moreton Basin (e.g. the Walloon Coal Measures). These units were quite diverse and ranged from sedimentary rocks of the Piora Member of Grafton Formation and the Kangaroo Creek Sandstone (recently reclassified as the Orara Formation), basalt lava flows of the Lismore, Astonville and Kyogle Basalts and Quaternary aged alluvium including coastal sands and riverine sedimentary environments.
Special glass water sample containers were used to collect the samples. These were then injected with a carbon dioxide and methane free gas to create a clean “air bubble”. The methane and carbon dioxide naturally dissolved in the water will then come into equilibrium with the “air bubble”. The resulting gas from the bubble can then be extracted and the concentration and isotopic composition of the carbon in the two compounds determined by an electronic analyser. The isotopic signature can then be assigned to recent biological formation (biogenic) or geologically derived (thermogenic) origin.
The end result was annoyingly quite not straight forward. The concentration of methane showed no obvious relationship to the chemistry of the groundwater. However there was a relationship between geological units. Methane concentration was very low in the basalt aquifers and relatively higher than the Clarence-Moreton basin sedimentary rocks and much higher in the Quaternary alluvium of the Richmond River valley floodplain and coastal sands systems. So there was more methane in some of the aquifers that were the less likely to be connected to any CSG formations! Quite counter-intuitive.
The isotopic signatures did not really help clear up this confusion very much. There appeared to be a large thermogenic component to the coastal sands and flood plain aquifer systems sometimes at concentrations greater than the formations that should be the thermogenic CSG source. Why? It was noted by some CSIRO scientists working in the Great Artesian Basin that sometimes biogenic gas can be oxidised and then be chemically reduced back to methane and this process favours the thermogenic isotopes (Day et al. 2015). So, It gives the impression of thermogenic gas.
This means that the methane gas concentration is related to the biological activity in and around the aquifer. The shallowest groundwater systems are the most connected with surface water and biological processes and therefore these have the highest concentrations of methane. The Clarence-Moreton Basin sediments are not connected with the CSG and natural gas rich formations.
This means that if companies like Metgasco do commence gas operations in the area there is a statistical background that can be used to compare if anyone becomes concerned about methane in their water bores. Interestingly, it also shows that methane in groundwater is probably not a good method to search for natural gas in the region. It might apply to other areas like the Great Artesian basin but apparently there are good barriers between CSG and non-aquifers in the Northern Rivers. This is good news since if something does go wrong it is now more easy to identify if it has impacted upon any groundwater.

References/bibliography:

Atkins, M.L., Santos, I.R. & Maher, D.T. 2015. Groundwater methane in a potential goal seam gas extraction region. Journal of Hydrology: Regional Studies. V4.
Day, S., Ong, C., et al. 2015. Characterisation of regional fluxes of methane in the Surat Basin, Queensland. CSIRO report EP15369

Sunday, 2 November 2014

Unconventional Gas - Gaps in Baseline Data

The NSW Office of Water has been busy compiling a series of videos on YouTube explaining various aspects of hydrogeology. This recent video is about data gaps in understanding baseline hydrogeological conditions in areas of 'unconventional' gas.

Monday, 19 May 2014

Geology, stratigraphy, water and CSG a bit more understood

A CSIRO researcher recently provided me with a copy of a conference paper on the Clarence-Moreton Basin that I have been searching for (Doig & Stanmore 2012). I was looking for this information for quite some time as I thought there was much to be learned from it. This is because the research was based upon coal seam gas (CSG) exploration results. It did not disappoint me at all. I have previously blogged on the stratigraphy of the basin but frequent visitors will be aware that there has been a hiatus on this topic. This is because I knew more information had been compiled as a result of gas exploration in the region. In particular this was to do with the Grafton Formation and Kangaroo Creek Sandstone. You can read my previous posts but note that Doig & Stanmore (2012) propose to reclassify these units (see figures 1 and 2 on this post). The information my previous posts were based upon Wells and O’Brien (1994). This is still the most comprehensive guide to the basin but now there is potentially some significant refinements.

Interpretation of the stratigraphy of the upper sequences of the Clarence-Moreton Basin
after Wells & O'Brien (1994) and Willis (1994)
Doig & Stanmore (2012) noted that CSG exploration drilling has provided important clues to the layers that make up the Clarence-Moreton basin that were inferred only through limited field exposure. Drilling provides a nice continuous profile which can be compared to other drill holes and to outcropping information. In the case of Doig & Stanmore (2012) this has completely redrawn the stratigraphy of the upper Clarence-Moreton Basin.

Reviewed Clarence-Moreton Basin stratigraphy after Doig & Stanmore (2012)
I will go into more detail in future posts but I note that Doig & Stanmore (2012) have made some major changes to the Grafton Formation. In particular, they have identified two new distinct members of the formation. The Piora Member and the Rappville Member. As for the underlying Kangaroo Creek Sandstone, this spatially and significant unit has been demoted simply to a member of a newly proposed formation called the Orara Formation. The Orara Formation itself has two distinct formations the demoted Kangaroo Creek Sandstone Member and the new Bungawalbin Member. (See figure 2).

The Woodenbong beds don’t get a guernsey at all in this paper. I suspect that this is because it would better fit into either the Bungawalbin Member of the Kangaroo Creek Sandstone or the Piora Member of the Grafton formation. More work needs to be carried out to make it more certain.

Clearly we do not understand much about the Clarence-Moreton Basin. Even the shallowest geological components! Knowledge keeps improving the more people investigate. The paper provides further interest because identification of the stratigraphic units and geochemical data obtained provide an indication of the risk associated with groundwater resources and CSG production. So as usual, further blog posts are required.

References/bibliography:
*Doig, A. & Stanmore, P. (2012). The Clarence-Moreton Basin in New South Wales; geology, stratigraphy and coal seam gas characteristics. Paper presented at the Eastern Australian Basins Symposium IV, Brisbane.
*Wells, A.T. & O’Brien (1994). Geology and Petroleum Potential of the Clarence-Moreton Basin, New South Wales and Queensland, Australian Geological Survey Organisation, Bulletin 241.

Monday, 28 April 2014

Clarence-Moreton Basin CSG Bioregional Assessment with some Philosophy


I was fortunate enough to be invited to a short presentation on hydrology and coal seam gas in the Clarence-Moreton basin last week. It was particularly good, in part, since lunch was provided and one of the presenters from the CSIRO ended up being someone I knew but had not seen for nearly a year. The topic of the presentation was an assessment that has recently commenced on the effects of coal seam gas (CSG) on water resources. Alas, it is something that the media has all but ignored. So a bit of information and a bit of philosophy in the blog post today!

This year a large investigation (a bioregional assessment) into all the possible effects of CSG on water commenced in earnest. It is a project funded by the Federal Government with many scientific project partners including the CSIRO. The project is based exclusively in the first case, on the compilation of scientific information. It is at arms-length from government and politics, so it is entirely technical. Therefore, this assessment is something which I personally find interesting and feel is of great value. The project scope has been set up by the Independent Expert Scientific Committee on Coal Seam Gas and Large Mining Development. The committee was established in 2012 and works under the authority of the Environmental Protection and Biodiversity Conservation Act 1999. A link to the CSIROs summary of its involvement can be found here.

The Clarence-Moreton basin bioregional assessment itself is one part of many bioregional assessments in numerous Australian coal basins. These assessments are themselves divided up into many different components including hydrogeology, ecology, ecotoxicology, environmental protection and many others. The presentation that I attended was specifically related to the hydrogeological modelling that is being developed. It briefly covered the different data sources and data limitations that were going to go into the modelling. It was good to see the thoughtfulness and consideration given to all the hydrogeological issues. Sometimes just figuring out what needs to go into a model is very hard in itself… but by far the hardest task is making sure the modelling reflects the real world. This is because of the varying amounts of "weighting" required to each of the input variables.

However, one of the things that saddens me is the lack of media time this assessment has been given. Many people are concerned that not enough is known about CSG activities in our region or in Australia or even more broadly, around the world. The media tends to focus on the conflicts that are occurring and not on the advances in technical knowledge that will lead to better decision making in the near future. The media does not seem to like reporting on things that we are learning but instead increases the confusion about matters that could lead to social conflict. Conflict, not cooperation seems to sell newspapers these days.

I was also a little saddened by some questions that were asked of the CSIRO presenters. One (Environmental Economics and Policy Academic!) asked whether it was ethical to undertake this assessment because it may lead to a CSG development being regarded as “safe”. To consider an increase in human knowledge of the world in which we live un-ethical is a big worry for me. Especially from a senior academic. In many ways it questions the very basic concepts of scientific endeavour. Having a scientific background, I feel we should not avoid learning something new because the facts that may arise could potentially contradict with a pre-determined world view. We are of-course moving from science to philosophy. I know my philosophical motives in life are to use knowledge to give the best outcomes for the environment and people that live in our region.

So, to end on this philosophical note: I recommend thinking about the knowledge that we have and how we use or ignore it. The media practice of looking only at conflict and dumbing down its stories on scientific and technical matters is well entrenched. I’m starting to genuinely believe that the media is making it harder to distinguish between facts and opinions purely in the media’s self-interest of creating a story to make money from. Recognising this is helpful to understanding where scientific information can guide us in the right decisions, as such I provide here a link to an ABC presentation on the media by an excellent modern day philosopher (one of my favourite non-science authors) Alain De Botton.

Tuesday, 25 March 2014

Fracking qualifies for aged pension


Over on the About Geology Blog, Andrew Alden shows us that yesterday was the 65th anniversary of Hydraulic Fracturing (Fracking/Fraccing). I was quite surprised to learn that this “unconventional” technique was developed in my grandparent’s generation. In his blog post Andrew points out some of the controversies in the United States about “Fracking” and provides his opinion on the practice. I don’t want provide to provide any opinion here about the Australian situation, just to outline a very quick summary of how it is used.

Having said the above, I think it is important to mention that there is some differences in experience between Australia and the United States. The main difference being that any chemicals used in “Fracking” must be fully disclosed (unlike the USA where they are much more secretive). Another difference is that in the USA “Fracking” is most commonly used in “Shale Gas” formations where it has been reportedly been linked to many problems with regard to aquifer cross-connection and contamination. Coal Seam Gas in the USA are also a situation where Fracking is frequently used, though this has very few of the same issues of Shale Gas fracking (Blackam 2014).

In Australia “Fracking” is frequently used in “Tight Gas” situations where directional drilling alone is impractical. This practice is especially common in the Moomba Gas Fields of Queensland and South Australia now this field has become depleted in the easily accessible “Conventional” gas. Hydraulic fracturing is also sometimes used in Coal Seam Gas situations. In the Northern Rivers I understand there has only been one case of hydraulic fracturing which was used in a “tight” situation.

This is by no-means a clear bill of health for unrestricted use of the practice of Fracking. Many questions still remain about what damage the practice can cause (e.g. Batley & Kookana 2012).

I’ve done some posts on the different natural gas sources and summarised them on this page. Until I actually do a blog post on what hydraulic fracturing actually is, I recommend this summary from the CSIRO. Alternatively, this CSIRO/Industry publication, though developed in partnership with the gas industry is actually even more detailed and very good.

References/Bibliography:

*Batley, G.E. & Kookana, R.S. 2012. Environmental issues associated with coal seam gas recovery: managing the fracking boom. Environmental Chemistry. vol9 p425-428
*Blackam, M. 2014. Source, Fate and Water-Energy Intensity in the Coal Seam Gas and Shale Gas Sector: An Exploration of the relationship between energy and water in the unconventional gas sector. Water, Journal of the Australian Water Association. vol41 No.1 p51-56

Monday, 17 February 2014

What is CSG?

What is CSG? Very simply Coal Seam Gas (CSG) is natural gas obtained directly from coal seams. Another common name for CSG is Coal Bed Methane (CBM). Like most natural gases, the chemical components of CSG are dominated by methane. Though some higher end hydrocarbons such as ethane or propane may also be present.  Carbon dioxide and nitrogen are usually significant components of CSG too and the higher the proportion of these non-hydrocarbon gases the lower the quality of the gas. This simple summary does not tell us very much, so more detail is required.

CSG is an interesting gas when compared to ‘conventional’ gases. ‘Conventional’ gas has migrated away from coal and organic rich sedimentary rocks into other porous rocks. The gas is then held in place by impermeable layers. What makes CSG different is that the gas has only migrated very small distances (if at all) to natural pore spaces such as fractures (cleats) in the coal layers. These pore spaces usually contain natural water that was left in the coal when it was laid down or water that subsequently migrated into the coal seam. The water associated with the coal seam is very important because it is actually the pressure of the water in the coal seam that keeps the gas in place. It is the hydrostatic pressure that keeps the gas in place.

In open cut or underground coal mining, CSG is a curse. It is considered a waste product and an explosion hazard. It is therefore vented as much as possible to make the coal mines safe to work in. The recent Pike River Mine explosion in New Zealand is an example where the failure to vent enough CSG caused a tragedy. As water is removed from coal mines the chances for gas mobilisation increases due to the above mentioned effect of hydrostatic pressure. This further increases the risk of explosion in coal mines.

Idealised relationship between CSG and water production
Natural gas became more popular for domestic and industrial use over the last few decades and the means to transport it economically became available (e.g. LNG). This meant gas that was often a by-product of the oil and coal industries became important in its own right. This led to people searching for gas sources in their own right, CSG included. Petroleum engineers realised if you reduce the pressure of water in a coal seam and collected the gas you could actually use the gas as a resource leaving the coal in place. This means that drill holes can be placed into coal seams and the water drawn out. The water drawn out (called formation water) is actually a ‘by-product’ of the gas extraction process. The formation water is the nuisance that needs to be removed to allow the gas to escape. This means that a new gas well will produce very little gas at first and lots of ‘waste’ water. As the water is drawn down the gas production increases and the water production decreases. Interestingly this is the opposite of that which occurs for ‘conventional’ gas, where waste water is a problem in the later stages of production but not early on.

Many people are concerned about CSG in Australia, particularly in our northern rivers region. This concern is driven by the possible effect of CSG extraction on beneficial groundwater. The use of techniques such as hydraulic fracturing that may be used to increase or prolong gas production is also raised as a concern. To keep this post short I will cover both of these issues in future. However, I will suffice to say that there is evidence that groundwater can be affected during CSG extraction despite producers trying not to have any impact. These are particularly noted in certain geological formations. There are also situations where there is no impact on important aquifers too. This matter is clearly quite complex and a one size fits all understanding does not apply very well. Hopefully, my future posts will tease the details out a little bit more.

Sunday, 2 February 2014

List of Natural Gas Posts

To try and bring some order to some subjects that have been dealt with in previous posts I think it would be useful to create some list posts. This first list is about a subject that is very topical at the moment, natural gas. Natural gas includes so called "unconventional" gas such as coal seam gas (CSG), shale gas, tight gas.

Posts on "conventional" gas
Posts on coal seam gas
Posts on shale gas
Posts on tight gas
Posts on other unconventional gas

Thursday, 15 November 2012

Some musings on coal seam methane

I thought I’d get myself in trouble again on the coal seam gas subject by having some musings on the public presentation by two academics at Southern Cross University last night. Of course the topic relates to the potential impact to the environment by the Coal Seam Gas Industry in the Northern Rivers. Research has been conducted by Dr Isaac Santos and Dr Damien Maher from the School of Environment, Science and Engineering. The subject of the presentation was a preliminary report on the status of water and air chemistry research at Tara in the southern Queensland Darling Downs which are being conducted Dr Santos and Dr Maher. This is up my alley and so I couldn’t help have some of my own thoughts of the matter. It is important to note that the research has not yet been published in a scientific journal as yet, but when or if it is, I will return to this topic. It is even more important to note that this post has no references as it is just some personal musings on the matter.

To summarise very, very broadly what the research appears to have found is evidence of methane directly attributable to geological derived methane gas stores (called thermogenic methane) as opposed to biogenic methane sources such as animals or organic matter decay in stagnant water, etc. This methane was measured in both surface water and in the air in an active coal seam gas extraction area in southern Queensland. The isotopes (isotopes are elements with slightly different numbers of neutrons in the atom, e.g. Carbon usually has either 13 or 14 neutrons) of the carbon that makes up methane (methane is a combination of carbon and hydrogen (CH4)) were measured during this process. The slightly different masses in these isotopes means that they have different stability in different environments (e.g. heating of coal would preferentially release one isotope over another). The isotopic composition can therefore be used to give an indication of whether the methane is biogenic or thermogenic. 

Where the interesting bit comes in is where Dr Santos and Dr Maher then draw on some comparisons. They had a look at the Richmond River valley and took observations. The observations were different, the Richmond River valley showed lower concentrations of thermogenic methane relative to Tara. Their suggestion then arises that it is the active gas field in Queensland has higher levels of fugitive emissions as a direct result of the coal seam gas industry operating in there. This suggestion can then be extended to presume that should the industry develop in the Richmond River Valley the levels of methane in the air and water would also increase. Now, this is a reasonable chain of assumptions but there are some things missed if the data is not interpreted properly. From my cursory understanding of the data sets gathered by Dr Maher and Dr Santos there are two (potentially contradictory) variables that could significantly affect their findings:
  1. The actual amount of thermogenic methane may be underestimated because CSIRO researcher John Smith has shown that during or following catagenesis (generally geological formation of gas), some methane may be converted into carbon dioxide depending on the abundance of dissolved oxygen in any formation waters, this carbon dioxide can then be naturally reconverted into methane. The process during reconversion from carbon dioxide into methane preferentially uses the biogenic indicator isotope. This can then give the false impression that the methane is biogenic and therefore actually underestimating the effect of the coal seam gas industry on gas emissions.
  2. The assumption that the natural levels of gas dispersal though normal processes of gas dispersal is the same in south Queensland (Surat Basin and Gunnedah Basins) is the same as that in the Northern Rivers (southern Clarence-Moreton Basin) may be erroneous. The geological units are different both in the depositional, structural, deformational, and erosional history for these basins. This is important because sources of thermogenic gas can be close to the surface in the Surat and Gunnedah Basins but in the Richmond River Valley the gas bearing layers are mostly trapped by a thick succession impermeable rocks such as the Kangaroo Creek Sandstone and Grafton Formation. This may mean a comparison is not a reasonable thing to do and therefore that the gas in Queensland is naturally occurring and not as a result of anthropogenic impacts. The low level of thermogenic methane in the Richmond River valley may simply be a reflection of the geology and any development of the industry in the northern rivers may actually not increase the amount of methane in the local water and air.
During the survey carbon dioxide levels were also measured. The weird thing is that the levels of carbon dioxide in the Tara area was higher than that in the Richmond Valley. When coal seam gas is targeted the presence of carbon dioxide sometimes means that the gas has been affected by some process that has degraded the quality of the gas and therefore carbon dioxide rich resevoirs are not as good economically as low carbon dioxide ones. As such these high CO2 reservoirs tend not to be the tapped to the same degree. The abundance of CO2 is therefore confusing as it does not seem to fit cleanly into the picture of an athropogenically affected local atmosphere.

Dr Maher and Dr Santos have both demonstrated many useful and interesting environmental studies over the years. I have no question of their ability to collect good quality data. It is important to note though that Dr Maher did caution about jumping to the immediate conclusion that the results they observed were totally due to the gas industry. Both of the researches did say that it was important that further data was required to give a more definitive answer by determining whether the geological assumptions were correct.

My view at this stage is that we should not jump to conclusions that it is actually the gas industry that is causing the measurable difference in methane from one location to another… though it may well be. When people say the science demonstrates this or that it is important to note that there are assumptions made in interpreting data and those assumptions could actually understate impacts or even the opposite, overstate them. One thing I think is important to note is that we really don’t understand much of the world around us and therefore we don’t really know if what we see is due to us or not. Slowly we learn more and this helps, but there is so still far to go.

Friday, 14 September 2012

Walloon Coal Measures of the Southern Clarence-Morton Basin

In previous posts I’ve briefly discussed the upper most layers of the Clarence-Moreton Basin. The Grafton Formation which overlies the Kangaroo Creek Sandstone which in turn overlies the Woodenbong Beds/MacLean Sandstone Member. The MacLean Sandstone Member is a member of a larger unit called the Walloon Coal Measures and it is this unit that I will briefly comment on now.

I’ve often heard people mistakenly say that the Walloon Coal Measures is a coal seam. This is not correct because the balance of the unit is actually made up of mixed rocks. According to Wells & O’Brien (1994) the coal measures include sandstones (made from volcanic rock fragments), carbonaceous siltstone, shale, mudstone, coal and clayey siltstones. Also clayey ironstone and infrequently oil shale and limestone can be found. Apparently tree stumps remaining in their growth position have also been found, though these have become carbonised (coal). The coal layers themselves are thin (millimetre scale) to occasionally thick (30-40cm) in the Southern Basin but the whole unit of all the different rock types that make up the Walloon Coal Measures totals at least 200 metres of thickness and is variable from location to location.

The coal in the measures is formed from peat that grew in a moist but temperate environment during the early to middle Jurassic in this area (smack in the middle of the age of the dinosaurs). The depositional environment appears to have been mainly flood-plain and meandering stream environments. Boggy mires forming the peat were common, but layers of volcanic ash from occasional volcanic eruptions from close by are preserved. This makes some of the coal seams high in ash content which reduces the quality of the coal. The environment was thought to be reflective of a period of high sea level.

The Walloon Coal Measures in Bexhill Brick Pit at Bexhill
Interestingly, the Walloon Coal Measures are some of the most extensive and continuous sedimentary rock formations in eastern Australia. They are correlated with almost identical units in the Surat Basin and the Maryborough Basin making the potential spatial extent of the unit huge. The outcrop of the Walloon Coal Measures is fairly limited with much obscured by the Grafton Formation, Kangaroo Creek Sandstone and Woodenbong Beds as well as Cenozoic aged volcanic rock especially associated with the Focal Peak and Tweed Volcanic areas. In our region the best exposures are in the Nimbin area and further north but also at Coaldale where the Clarence-Moreton Basin has been deformed creating a bulge which has been eroded exposing the Walloon Coal Measures. Areas to the south of MacLean show some outcrop and on the other side of the Basin, the Kangaroo Creek and areas near Tabulam show good exposures. Other places have exposures of the Walloon Coal Measures because of local faulting and folding that has occurred in places like the Richmond Range.

I understand that coal mining was historically carried out near Tabulam, Kangaroo Creek and Nimbin but the size of the deposits was such that these were only small and fairly short lived enterprises, though Murwillimbah did have a power station earlier last century which was fueled on local coal transported from the area around Tyalgum. Of course now the Walloon Coal Measures has been frequently under discussion regarding its gas potential especially in the form of coal seam gas (CSG) also known as coal bed methane.

The presence of gas in the coal measures is a natural function of coal and the formation of coal when it was formed. As the rock is gently ‘cooked’ following its deposition as peat gases are given off. Peat is made from decayed plant and animal matter which when broken down into its elemental constituents is mainly hydrogen (H) and carbon (C) atoms. The hydrogen is bonded to the carbon in oxygen poor environments and forms methane (CH4) and sometimes more slightly moe complex organic molecules such as C2H6, C3H10 etc, or if conditions are right the molecules are big enough and complex enough to form oils. In the case of the Southern Clarence-Moreton Basin Walloon Coal Measures the conditions were too hot for oil to be stable so the smaller gas molecules are formed. Gas may be trapped in the layers of coal within voids and cracks (called cleats) or they may sometimes migrate to other layers where they can be trapped. This is actually the difference between ‘conventional’ gas and coal seam gas, i.e. all conventional gas was once coal seam gas. Oil shale and shale gas are also present in some areas of the Walloon Coal Measures but these are very rare and are small deposits (I might do a post on these in the future but given their insignificance I might not get there). Russell 1994 noted that the best quality gas, mature or 'dry gas' was likely to be found abundantly in the eastern portion of the basin, whereas wetter gas and oils were likely to be more prevalent in the west. Interestnigly it is thought that the maturity is a response to the thermal changes in the Earths crust during the formation of the Tasman Sea.

The Walloon Coal Measures contains both conventional and coal seam gas and very little oil. Indeed, I understand that substantial amounts of conventional gas was first discovered in the Hogarth Ranges about 40 years ago and that more recently Metgasco have discovered significant amounts at Kingfisher which I think is to the south of Casino. As far as coal seam gas goes, if Walloon Coal Measures are present there is coal and so there is also a chance that gas may also be present.

References/bibliography:

*O’Brien, P.E., Korsch, R.J., Wells, A.T., Sexton, M.J. Wake-Dyster, K. (1994) Structure and Tectonics of the Clarence-Morton Basin. In Wells, A.T. and O'Brien, P.E. (eds.) Geology and Petroleum Potential of the Clarence-Moreton Basin, New South Wales and Queensland. Australian Geological Survey Organisation. Bulletin 241.
*O'Brien, P.E., Powell, T.G. & Wells, A.T. (1994). Petroleum Potential of the Clarence-Moreton Basin in Wells, A.T. and O'Brien, P.E. (eds.) Geology and Petroleum Potential of the Clarence-Moreton Basin, New South Wales and Queensland. Australian Geological Survey Organisation. Bulletin 241.
*Russell, N.J. 1994. A Palaeogeothermal study of the Southern Clarence Moreton Basin in Wells, A.T. and O'Brien, P.E. (eds.) Geology and Petroleum Potential of the Clarence-Moreton Basin, New South Wales and Queensland. Australian Geological Survey Organisation. Bulletin 241.
*Wells, A.T. and O'Brien, P.E. 1994. Lithostratigraphic framework of the Clarence-Moreton Basin. In Wells, A.T. and O'Brien, P.E. (eds.) Geology and Petroleum Potential of the Clarence-Moreton Basin, New South Wales and Queensland. Australian Geological Survey Organisation. Bulletin 241.

Thursday, 26 July 2012

Why you won't find CSG here now

As you might have noticed there has been an occasional blog post that I’ve done dealing with coal seam gas matters in a cursory manner. I’ve been asked again and again by many people to explain aspects of the industry and the environmental issues associated with it. I’ve worked in coal exploration and in an environmental capacity before and I know a moderate amount about gas extraction too but I’m afraid I don’t have all the answers. Caution is needed especially given the highly political nature of the subject now. Therefore, I don’t really want to weigh into the subject, but I’ll have a very quick comment or two just to really outline the big picture. In the last week I cautiously commented in the Northern Star online twice as the avatar ‘GeologyRod’ just to correct a couple of mistakes people have made. I’ve also written one letter to the editor cautioning about how to interpret water chemistry. Given the heated debate, I’m not sure I will do so again!

From what I understand of the coal seam gas industry and the geology directly applicable to the area I am not as concerned about the industry doing damage to groundwater sources or surface water as some. From my contaminated land experience, I do however; see two potentially serious environmental problems. These are failure of well casings causing local cross-connection of poor and good quality water (and gas) and the disposal of poor quality production water (salinity is the biggest problem, as the chemicals potentially used can easily be treated but salt is hard to get rid of).

Considering a risk assessment approach (using the possible outcome and likelihood of that outcome) provides many scenarios with only the two mentioned above displaying an elevated level of risk (in my very hastily developed opinion). The nature of the geology of the southern Clarence-Moreton Basin is such that regional scale ground water contamination touted as a problem by many is probably of negligible risk, though this may occur elsewhere in eastern Australia in places like the Surat and Gunnedah Basins. However, local groundwater contamination (with a chance of affecting someone’s water supply bore) is probably on the moderate to high side. The disposal of salty water poses a moderate risk to the environment through adversely affecting large areas of pasture which might be irrigated or a moderate to high level if discharged untreated directly to fresh water streams.

Both of the matters outlined above are difficult to deal with and not knowing about the ins and outs of operators in the region I don’t know how the companies are going to mange these problems. This is ignorance on my part. I can only assume that this has been considered in detail (a legal requirement) so that the management of these problems is adequate.

This is my opinion only and given that opinions can get one in trouble I won’t be commenting on any other matters CSG related for quite some time. I really don’t like getting involved in political matters and it is easy to be carried into them. I hope I haven't been carried into them too far already. If you want to know a bit more about the technical side of coal seam gas extraction and the pollution risks there are some good fact sheets put out by the CSIRO linked to here. Maybe that is why I like rocks so much, they don’t argue with you (too much).

But back onto happier topics. I’ve been most excited by some new information that has come my way, one a University of New South Wales thesis by Leonary Drury on the Richmond Valley stratigraphy, groundwater, dating and much more, and the other is the preliminary geophysical data package released by the NSW geological survey. I’ll be blogging on these topics (plus others) in the coming months.

Wednesday, 13 June 2012

At Nashua where chert should not be

In an earlier post, Booyong not in the Clarence Moreton Basin? I indicated that I had been informed that there was evidence of Palaeozoic sedimentary rocks near Booyong, and that if this is the case there is significant implications on the morphology of the Mesozoic aged Clarence Moreton Basin in the area between Byron Bay and Lismore. It therefore has implications for the exploration for coal seam methane too.

Well, I can confirm that after much searching, I came across an ephemeral creek north of Booyong near the Casino to Murwillimbah Railway line at Nashua that clearly contained much chert. Additionally, a railway cutting appeared to have significant folding, but was very weathered so identification of the parent rock and indeed even whether it was folding was not clear.

Chert at a location between Nashua and Booyong
Chert is a rock that is essentially absent from the Clarence Moreton Basin, however, it is common in the underlying rock of the Beenleigh Block, known as the Naranleigh-Fernvale Group. This group of rocks formed in a deep marine environment. It consists of turbidite sediments that occur when parts of the undersea continental slope erode and some slates and chert. The Chert is formed on the ocean floor where chemical and biological material settles over a long period of time. All of this rock was then transported and accreted onto the edge of the Australian Continent before the Devonian or Carboniferous period which was around 333-343 million years ago during the formation of the New England Orogen. This process of accretion has caused folding and low grade regional metamorphism to be common place in this geological unit. By comparison, the sediments of the Clarence-Moreton Basin are dominately continental derived and are un-metamorphosed. They were mainly deposited in river systems, lakes or at best shallow marine environments. Chert does not form very well in these environments.

But, what is so exciting about this outcrop? The Neranleigh Fernvale Group occur along the edge of the hills above the coastal plain south of Ballina and are exposed just about everywhere from the Gold Coast to Byron Bay. If you follow the line of outcrop from near Ballina you will find it is overlain between Byron Bay by the Clarence Moreton Basin which extends all the way to the Tabulum in the west. But because the outcrop occurs at Nashua this shows us that the area to the east is probably a different basin from the main part of the Clarence Moreton to the west. This has significant implications for understanding the structure of the earth here and also affects where resources such as gas can be explored for. For those that were worried about coal seam gas, you won't find any at Nashua.

Thursday, 3 May 2012

Geology in the air

A few months ago the New South Wales Geological Survey released their preliminary data package for the Grafton-Tenterfield Airborne Geophysical Survey (link to info here). The survey was conducted as part of a program that has been going on for several years known as New Frontiers New South Wales. Nearly all of the state has now had high quality data obtained for it instead of the old, poor quality data for the whole state. But why has this been done?

Area of latest survey from NSW DPI
The regional survey has been conducted to better understand the geology of the region and as a result this information may guide mineral exploration as well as provide additional data that can help land management especially in relation to soil transport, erosion potential and soil chemistry. This is done through three primary measurements: radiometrics (measurement of natural radiation), magnetics (measurement of how magnetic the earth is), and DEM (measurement of the elevation of the earth). How these can be used to understand the earth through the aerial survey is outlined below:

Radiometric measurements show the relative abundance of three naturally occurring elements in the rock and soil these are Potassium, Thorium and Uranium. The different ratios of these elements can distinguish broadly between different rock types without the need to visit the site and the intensity can be used to do the same. If an area shows up as being rich in radioactive elements it may be underlain by a granite or similar rock as the radioactivity is directly related to the mineralogy of the parent rocks. If an area is eroded the visibility (or comparative lack of) of radioactive minerals may be seen in downstream. The different types of radiation also provides an indication of the chemistry of the soil and rock. This process can only show the radiation on the surface (e.g. in soils, sediment and exposed rock)

Magnetic measurements do a similar thing as far as identifying elements. But instead of radioactive elements it shows the abundance of iron especially in the form mineral magnetite. Again, the geophysical response will be based on the rock mineralogy. Rocks such as basalt will have a strong response (more iron) and so will wet areas. However, unlike radiometrics, magnetics can show deeper structures in the earth such as buried plutons, faults, dykes and others. This means that drilling is not necessarily required to have a good idea of what lies beneath the surface. It is interesting stuff and the maps produced are often very pretty colours! All of the measurements require “calibration” with a digital elevation model (DEM) which shows the shape of the earth.

Recently (2005?) obtained information in the New England and Tamworth areas have shown up major hidden fault systems, areas prospective for gold, deformation of sedimentary basins that may increase prospectivity for oil and gas, new granite plutons, hidden granites, a better understanding of volcanism including confirmation of new volcanic centres and its associated rock (such as the Maybole Volcano). One aspect that appears promising that the survey will aid in determining the viability for is geothermal energy. Geothermal energy may be obtained from related to deep buried granites and magnetics can be used to find likely locations.

It is interesting to note that I have seen reports in the media (and formal submissions to Coal Seam Gas parliamentary inquiries) that some people have been upset by being “buzzed” by aeroplanes from companies undertaking coal-seam gas exploration. Looking at the timing, this may be related to concern about Coal Seam Gas exploration by several companies in the area and I tend to think that it is likely that the aeroplane may have been part of the regional geophysical survey.

It is important to know just how useful this information is to understanding our planet, even if the information can be used in a way that some do not appreciate. Geology usually has two aspects, one is scientific (understanding the world we live) and the other is applied (using such knowledge for other purposes such as mining). The geophysical information obtained by New Frontiers New South Wales is purely scientific but this knowledge can be applied to Mining but it can also be applied for Environmental purposes. Unlike many others, I am cautious about stopping research because of what it may be potentially be able to be applied to.