Showing posts with label richmond river. Show all posts
Showing posts with label richmond river. Show all posts

Saturday, 17 December 2016

Blog Update #10 - Pain and a paper

Eleanor Faith Holland
The blog has been on hold for a while. But I have always intended to keep on writing. There has been some major changes in where I live and work and most recently our lovely 6 year old daughter Eleanor passed away. There has been much pain but there is much celebration too for our special girl. My wife Becky and I are in feelings of loss. That said, we want to celebrate the life of our daughter who demonstrated so much strength in so many ways. A service will be held at St Peter’s Cathedral in Armidale at 2pm on Monday (19th December).
 
Coming to Christmas it is a subdued feeling at our home and my birthday was yesterday as well so I didn’t feel like celebrating. However, there was something I was excited to see. A confirmation that a paper that I was a co-author of has been accepted to the journal Science of the Total Environment (Santos et al 2016). I was only a minor co-author but there is something about having your name up there that caters for ones ego.

The highlights of the article are:
  • We assess groundwater recharge through a pervasive layer of floodplain muds.
  • Modelled groundwater flow paths were consistent with tritium dating.
  • The clay layer did not prevent recharge because of macropores and cracks.
  • Fine-grained floodplain soils do not necessarily protect underlying aquifers from pollution.
  • Combining multiple techniques gives more confidence in recharge estimates.
The article can be found here:
 
http://dx.doi.org/10.1016/j.scitotenv.2016.11.181

References

*Santos, I.R., Zhang, C., Maher, D.T., Atkins, M. L. Holland, R. Morgenstern, U & Li, Ling. 2016. Assessing the Recharge of a Coastal Aquifer using Physical Observations, Tritium, Groundwater Chemistry and Modelling, Science of The Total Environment, Available online 15 December 2016, ISSN 0048-9697, http://dx.doi.org/10.1016/j.scitotenv.2016.11.181.

Tuesday, 1 October 2013

The Woodburn sands of time

I’ve been spending some time working on a project in the lower reaches of the Richmond River Valley. This project got thinking about the stratigraphy and depositional history of that area. Particularly about a unit of unconsolidated sand called the Woodburn Sands (Drury 1982). In some ways this post follows on from a couple of posts that touched on the subject of sea level changes during the Quaternary.

To begin to understand this unconsolidated sediments of the Richmond River Valley we turn to the most recent mapping of the area. Troedson et al. (2004) comprehensively mapped the coastal Quaternary sediments of the whole east coast of NSW. Troedson et al. (2004) demonstrated that over large areas of the lower Richmond Valley there are two units of coastal sand which formed in barrier environments. The most obvious coastal sands are active dune and beach systems formed from a barrier by the action of present day long-shore drift. These active barrier systems occur in many places along the coast. Troedson et al. (2004) also mapped extensive areas of what an earlier researcher Thom (1965) first identified as an inner coastal barrier. This inner barrier is comprised of an old beach system that is no longer active.

Drury (1982) undertook a comprehensive study of the Quaternary sediments of the Richmond River Valley. He confirmed the view by Thom (1965) that there was an old inner barrier system. This system was formed during a higher period of sea level than today and caused regional changes to coastal sedimentation (e.g. I previously posted on the estuarine sediments of the Lismore area). The high sea level eroded away the pre-existing beaches and formed new beach systems a significant distance inland (sometimes 15km or more). Then as the sea level retreated, the new beaches were no longer subject to erosion from the sea and were left intact. The beach systems continued to form on the sea-ward side of the old beaches and eventually built up a very large area of sand. These old beach systems are what made the Woodburn Sands.

The Woodburn Sands occur in a discontinuous zone from Broken Head National Park to the Evans River and the lowest reaches of the Richmond River (Swan Bay). The maximum thickness intersected is about 35 metres, so the sand layers can be very thick.

Like many places in eastern Australia, the action of coastal wave and wind processes can lead to concentrations of heavy mineral sand.  These deposits are called mineral placers. The Woodburn Sands is another of these areas where placers are common. Indeed, a lot of sand mining took place on the north coast to exploit the high concentrations of zircon, ilmenite and even gold. Presently, the Woodburn Sands is not mined for minerals but is used as an important source of good quality groundwater, this includes the regional town water supply authority.

Drury (1982) also included an unusual feature within the Woodburn Sands. This feature was named the Broadwater Sandrock by Mcgarity (1956). McGarity (1956) demonstrated that the Broadwater Sandrock was formed by the cementation of sand by organic rich material probably formed by changes occurring in a peat swamp environment. This sandrock is a common feature up and down the east coast of Australia. Another common feature is the diversity of names given to this material which include ‘indurated sand’, ‘coffee rock’, ‘coastal sandrock’, ‘painted rock’, ‘beach rock’, ‘humate’ and ‘B-horizon of the humus podzol’ (Drury (1982), Mcgarity (1956), Thom (1965) and Den Exter (1974)). Take your pick! I follow the terminology proposed by Drury (1982) who included the Broadwater Sandrock as a member of the Woodburn Sands, i.e. the Broadwater Sandrock member.

Postscript:
Since doing the above post an anonymous commenter has rightly corrected and provided further information. You can see the full comment below, the comment much more accurately describes 'coffee rock' formation but I reproduce this section specifically:

...humicrete (coffee rock) forms as the B-horizon of a fossil soil on sand (a podsol). It is NOT a sedimentary layer itself ie NOT a stratigraphic unit, so should not have been referred to as a "member" ...

As such, I have now changed my mind! The Broadwater Sandrock member is not the best name after all. It seems that 'B-horizon of the humus podzol' is indeed one of the best ones. Humicrete is another good one. Well, it seems that the diversity of names will probably continue, but we can remove the one I thought the simplest (Broadwater Sandrock member) from the list!

References/bibliography:

*Den Exter, P.M. 1974. The Coastal Morphology and & Late Quaternary Evolution of the Camden Haven District, NSW. Australia. PhD thesis. University of New England, Armidale.
*Drury, L.W. 1982. Hydrogeology and Quaternary Stratigraphy of the Richmond River Valley, NSW. PhD thesis. University of New South Wales, Kensington.
*McGarity, J.W. 1956. Coastal sandrock formation at Evans head, NSW. Proceedings of the Linnean Society of New South Wales. V81 p52-58.
*Thom, B.G. (1965). Late Quaternary morphology of the Port Stephens-Myall Lakes area, NSW. Journal of the Royal Society of New South Wales V98 p23-36.
*Troedson, A., Hashimoto, T.R., Jaworska, J., Malloch, K., Cain, L., 2004. New South Wales Coastal
Quaternary Geology. In NSW Coastal Quaternary Geology Data Package, Troedson, A., Hashimoto, T.R. (eds), New South Wales Department of Primary Industries, Mineral Resources, Geological Survey of New South Wales, Maitland.

Thursday, 1 November 2012

Softer sediments in the Wilsons River Valley

I’ve recently been observing an interesting environmental restoration programme on the Wilsons River upstream of Lismore. During this programme I started to think about the flood plain of the river and ‘recent’ geological history of the area. Cotter 1998 and in his earlier undergraduate work developed a concept of the geomorphology due to the lava flows associated with the Tweed Volcano and the earlier Alstonville Basalt. I did an earlier post on the flow direction of the Wilsons River as related to the volcanic history of the area but I’ve done just about nothing on the post volcanic sequences.

The best work done on the ‘recent’ sedimentary formations of the Wilsons River valley was a PhD thesis, Drury 1982. This was done as part of the then Water Resources Commission (now State Water) back when NSW government departments actually collected new information to guide future decision making (oops, there is a political comment in there). Drury 1982 was a huge thesis that provides a vast amount of information on the development of the Richmond Valley based mainly on the groundwater bores operating at the time supplemented by some (then) new drilling and geophysical techniques. To my knowledge no significant further published scientific assessment of the Quaternary sequences has occurred since Drury's thesis was written.

Cenozoic Stratigraphy of the Lismore area
It is probably hard to follow the stratigraphy very easily so hopefully my sketch to the left which is based on Drury’s work helps. Drury 1982 indicates that the upper most layer of sediment in the Wilsons River and Leycester Creek valleys upstream from Lismore was unsurprisingly, flood plain sands, silts and clays which continue to be deposited today following floods. Conformably underlying this flood plain sediment the material encountered is called the Green Ridge formation. This formation appears to be a delta system being built at the end of the Upper Pleistocene (~12,000 years ago). Often the top of the Green Ridge Formation is cut by the Wilsons River and its tributaries, for instance at Boat Harbour Nature Reserve the lower banks of the river seem to be quite deep maybe even cutting into the even older formations (e.g. the Gundurimba Clay). Drury (1982) demonstrated that the Green Ridge formation is both contemporary with and overlies the Gundurimba Clay, which is made from estuarine clays.

The Gundurimba Clay is a unit was formed during a period of relatively high sea level (higher than the present day) and warmer conditions. Shells were common but coral was found maybe indicating the idea that the area where the Gundarimba Clay was being deposited went through a warmer spell than we experience now.  Drury 1982 identified pollen spores indicating the surrounding area was dominated by rainforest with some eucalypt forest too, in my mind this creates a picture that it was possibly a proto-‘Big Scrub’ low-land rainforest with the ‘Big Scrub’ proper forming after the next cold period at the beginning of the Holocene. However worth noting that the Upper Pleistocene is recognised around the world as starting off in a warm period turning into a glacial period with the last glacial maximum occurring around 22,000 years ago.

Drury 1982 demonstrated that preceding the deposition of the Gundurimba Clay there was a period of erosion meaning that the Gundurimba Clay unconformably overlies the South Casino Gravel. The South Casino gravel in turn uncomformably overlies the Cenozoic volcanic rocks of the Lismore and/or Alstonville Basalt. The South Casino gravel is at least Middle Pleistocene in age and is derived from the erosion of the underlying volcanics. Given its coarse nature it is highly permeable and is considered a good source of groundwater in other parts of the Richmond Valley but to my knowledge is rarely used in the Wilsons River area.

I'm probably trying to combine a lot into this one post so I'll have to tease out the details a bit more in future posts, especially that relating to the Gundurimba Clay and palaeo-environmental conditions which I know at least some of my blog readers have a keen interest in. At least I hope that this provides a starting point.

References/bibliography:

*Drury, L.W. 1982. Hydrogeology and Quaternary Stratigraphy of the Richmond River Valley, New South Wales: In Two Volumes. PhD thesis, University of New South Wales.
*Cotter, S. 1997. A Geochemical, Palaeomagnetic and Geomorphological Investigation of the Tertiary Volcanic Sequence of north eastern New South Wales. MSc thesis, Southern Cross University.

Monday, 14 May 2012

Where the river joins the sea

In previous posts I've discussed a few peculiarities with the way some of our rivers flow, in particular the Clarence River which once ran backwards and the Wilsons River which flows away from the sea. This post is about another strange feature of the Northern Rivers which is the way many of them discharge into the sea.

Many people in the region will be aware of various issues with regard to erosion of sand our beaches or even deposition of sand choking river and creek mouths. Many people may be aware of Byron Shire Council having a policy of planned retreat from the areas along Belongil Beach at Byron Bay. Others may have heard of the silting up of Nambucca Harbour. But even less will realise that the biggest cause of these different problems is actually the same.

Richmond River mouth at Ballina. Note the white water of the Bar.
 Because of longshore drift the Ballina Bar is often treacheous.


But, let me back up for a moment. Have a look at Google maps or (even better) a paper map of the north coast of the New England / New South Wales area. Look at most of the major rivers. The Nambucca River, Clarence River, Richmond River, Tweed River. Look too at some of the smaller streams such as Tyagarah Creek, Cudgen Creek and others. What you might notice about all these streams is that they seem to flow north and roughly parallel to the coast only a short distance inland. They also join the sea on the southern side of headlands and on the northern side of long sandy beach systems. And therein lies the cause.

Along the coast of Eastern Australia are currents, the most well known is the Eastern Australian Current that flows south. However, the prevailing wind conditions which blow from the south to the north means that the direction of small currents and wave action is directed northward, these are called longshore currents. This has been the case during the Holocene (for many thousands of years) and has resulted in enormous amounts of sand being transported slowly up the coast line, where much of it ends up in southern Queensland forming Fraser Island.

Where the most direct route for the regions rivers would be to join the sea at right angles, longshore drift has caused sand dunes to build up sometimes even to the extent that it sometimes closes the mouths of the rivers. The movement of the sand has slowly pushed the river mouths further and further to the north until the come to an outcrop of rock which blocks the way. At this point the river mouth will cease to migrate along the coast and remain relatively stable until some storm, flood or man-made change occurs. A great example of a man-made change is Coffs Harbour, but more on that another time.

But why does the beach erode in many other places? Well, simply it is the impact of the headlands. On the northern side of the headlands along our coast there is only a little supply of sand (since the headland directs the sand away). Instead this is were sand is sourced to be transported north along the beaches. Places like Belongil Beach at Byron Bay are excellent examples where sand is naturally carried away northward along the edge Byron Marine Park, leaving houses built next to the sea at risk of being destroyed by the erosive processes.

As an aside, longshore currents are also partly responsible for the creation of some mineral deposits which have historically been mined. But more on that in a future post. 

Since I wrote the above, an anonymous comment raised an interesting point which quite reasonably raises questions my statements about the sand stability north of Byron Bay headland. I have reproduced the comment in red below:
Despite the position of rock headland anchor points and the change in coastal alignment along Northern NSW, any differential in longshore drift rates (sand losses from the sediment budget)should have equilbrated during the Holocene period, including sand losses into the deepwater sand lobe off Cape Byron. Erosion at Belongil Spit is more likely due to the interrupted supply caused by the Richmond River breakwaters at Ballina.
Bibliography/references:

White, M. E., 2000. Running Down, Water in a Changing Land. Kangaroo Press.

Thursday, 22 December 2011

Coraki has its faults

Coraki is a nice little town on the Richmond River just near its confluence with the Wilsons River. The town is located on the flood plain and therefore many parts of it can be inundated in the case of major floods. The flood plain provides a relatively fertile plain that grows excellent pastures and much sugar cane, especially the further down stream on the Richmond you go. But Coraki has its hidden faults.
Being an active flood plain the area surrounding Coraki is dominated by recent alluvial deposits generally of Holocene age but with lots of slightly older Pleistocene alluvial and estuarine sedimentary deposits. Areas that are under permanent shallow unconfined ground water influence tends to retain pyrite which is produced by bacteria in an anaerobic (oxygen poor) environment (i.e. under stagnant water). When this pyrite is exposed to the atmosphere or more oxygenated water by the action of drainage for agricultural, construction or flood mitigation purposes the pyrite oxidises. Pyrite is Iron Sulphide (Fe2S) which with water (H2O) forms H2SO4 which is more well known as sulphuric acid. This acid can then be discharged causing degradation to aquatic life or degradation of land creating unproductive acid scalds.
Not all of the town is in the flood plain, in fact about half is located on some low hills that are comprised of Kangaroo Creek Sandstone. The Kangaroo Creek Sandstone is part of the Clarence Moreton Basin and its exposure here may be partly due to a fault called the Coraki Fault. In the area of Coraki and also at Tullymorgan and maybe even places like Clifden near Grafton the faulting of the Coraki Fault has created some unusual features within the Mesozoic Clarence Morton Basin and the underlying Palaeozoic basement rocks. These features cannot be seen on the Earths surface but can only be identified by geophysical techniques, in particular seismic surveys.
So, what are the features that can’t be seen? Well, there is the Coraki fault itself which is a dextral strike-slip fault meaning that the eastern side of the fault has moved northwards relative to the western side. But there is also a weird structure which is referred to as a “flower structure”. This occurs when another fault is present perpendicular to the main fault. This creates a central wedge shaped block which near Coraki has been squeezed by the faults upward and created here, slightly more elevation in the Kangaroo Creek Sandstone and possibly other units of the Clarence Morton Basin. This is probably hard to visualise, so maybe a diagram will help when I can get one to embed.
Blog Note: I like to provide photos for these sort of posts but recently where I store photos (skydrive and/or GoogleDocs) has changed its method for providing URLs to allow embedding of these files and Blogger doesn't like the new URLs. So, these next blogs might be a bit more bland looking until I figure out a better way to store and embed photos.

Note that the stratigraphy of the Kangaroo Creek Sandstone has been recently revised since this blog post. See the this post for details.

References/Bibliography:
*O’Brien, P.E., Korsch, R.J., Wells, A.T., Sexton, M.J. Wake-Dyster, K. Structure and Tectonics of the Clarence-Morton Basin in Wells, A.T. and O'Brien, P.E. (eds.) Geology and Petroleum Potential of the Clarence-Moreton Basin, New South Wales and Queensland. Australian Geological Survey Organisation. Bulletin 241.